Using your refrigerator-freezer, continued.
$~iI.st~g the refrigerator | Removing crisper, meat | Removing the base grille. |
. | drawer and covers. |
|
heavy food items.
To remove glass shelf:
1, Remove food from shelf,
2.Tilt up front.
3.Lift up back until hooks clear the shelf support slots.
4.PuIl shelf straight out. Be careful - glass shelves are heavy!
To replace glass shelf:
1.Insert the rear hooks into the shelf support slots.
2.Tilt up front until hooks drop into
slot. Lower front of shelf to level position.
Removing and adjusting the freezer shelves.
To remove the shelf:
1.Remove food from shelf.
2.Lift right side of shelf off wall supports.
3.Slide shelf out of supports.
4.Replace in reverse order.
To adjust the shelf:
1.Remove food from shelf; then remove shelf.
2.Slide supports upward and remove.
3.Slide supports downward into new position.
4.Replace shelf.
Note: The
I
To remove crisper and meat drawer:
1.Slide crisper or meat drawer straight forward to the guide stops.
2.Lift the front until it clears stops
3.Slide crisper or meat drawer the‘ rest of the way out.
4.Replacein reverse order.
To remove the covers;
2.Push up glass insert from the bottom, then slide out with both hands. (Be careful - the&s is heavy!)
2.Lift front of cover frame and pull up and out.
3.Repeat for meat drawer cover.
To replace covers:
1.Fit meat drawer cover notches into supports on walIs of refrigerator. Lower cover into place.
2.Repeat for crisper cover frame
3.Slide back of crisper cover glass insert into place; then lower front.
To remove:
1.Open the refrigerator and freezer doors.
2.Pull grille outwards as shown.
3.Do Not remove Tech Sheet fastened behind grille.
metal clips
l- SUJYPOR tabs 7
meta; clips \ SUPPorttabs
To replace:
1.Line up grille support tabs with metal clips
2.Push firmly to snap into position.
3.Close the doors.
Page 5