Using and maintaining special model features. | Model RS25AW |
Changing the light bulbs.
Electrical Shock Hazard Unplug the refrigerator or disconnect the main electric power supply to the refrigerator. Failure to do so can result in electrical shock or injury.
To change refrigerator light bulb:
1.Remove the bulb from the socket located behind the control console.
2.Replace with a
To change light bulb above crisper:
1.Grasp front of light shield.
2.Lift front of shelf up and pull shield out.
3.Remove bulb from socket.
4.Replace with a
5.Place shield over bulb and push into place.
To change upper freezer light bulb:
1.Lift top of shield up and pull shield out.
2.Remove bulb from socket.
3.Replace with a
4.Place shield over bulb and snap into place.
To change lower freezer light bulb:
1.Push in sides of light shield until it snaps free.
2.Remove bulb from socket.
3.Replace bulb with a
4.Place shield over bulb and snap into place.
Removing the freezer basket.
To remove the basket:
1.Slide the basket forward to the guide stops.
2.Lift front of basket until it clears stops. Slide basket the rest of the way out.
To replace the basket:
1.Place basket on the slides.
2.Lift slightly until the stops clear the front of guides.
3.Slide basket in.
Freezer
Ifght
Freezer control
Automatic fee maker
Ice bin
Freezer light
Adjustable
freezer shelves
Crisper cover
Crisper
Meet
drawer
Cold water and ice dispenser.
The small tray beneath the dispenser is designed to evaporate small spills. Do Not pour water into it. There is no drain in this tray.
A. How the ice dispenser works.
Ice comesfrom the ice maker storage bin in the freezer. When the dispenser bar is pressed, ice falls through a chute between the ice bin and dispenser and out an open trap door. When the dispenser bar is released, a faint buzzing sound may be heard for a few seconds.
- control
- Light
- utmy compartment
* Model and serial number label
. Adjustable glass shelves
Crisper
- light
- Door shelves
- Meat drawer
air control
B. How to dispense ice.
1.Press a sturdy glass against the ice dispenser bar. (Pressure and tumbling ice can break a fragile glass.)
2.To stop the ice from dispensing,
remove the glass.
Note: “First” ice may be discolored or
C. How the cold water dispenser works.
Chilled water comes from a
D. How to dispense cold water.
1.Press a sturdy glass against the water dispenser bar. (Pressure can break a fragile glass.)
2.To stop the water from dispensing, remove glass.
Page7