Using your FoodSaver® VAC430
How to make a Bag from a FoodSaver® Roll.
1.Place the appliance on a flat, dry surface and plug the supply cord into a standard electrical outlet.
2.Open the lid.
3.Cut roll to desired length plus 7.5 cm. Place one end of the bag on the sealing strip, but do not place the bag into the vacuum channel. See figure 1.
Figure 1 |
4.Close the lid.
5.Position your hands over the “PRESS/ HOLD” icons on both sides of the lid and press firmly with the palms of your hands. See figure 2.
Figure 2 |
Press and hold |
The motor will start. Continue to press and hold until the green
Figure 3
You may now remove your hands from the lid and wait for the vacuum process to continue.
6.The red sealing indicator light illuminates to inform you when sealing is in progress.
7.When the red indicator light turns off, press the “Release/Cancel” button. See figure 4.
Figure 4
Press Release/Cancel
Lift the lid and remove the bag.
NOTE: Wait 20 seconds before vacuuming and / or sealing again.
6