Troubleshooting continued
The Bag Melts:
•Should sealing strip overheat and melt the bag, it may be necessary to lift the lid and allow sealing strip to cool for a few minutes.
•
The FoodSaver® Storage Life with FoodSaver® Canister will not vacuum:
•Make sure the rubber gasket on the canister lid is free from food materials, crumbs, coffee grinds, etc.
•Make sure the rim of the canister does not have any cracks or scratches. Any gaps can prevent a vacuum from forming.
•Make sure you aren’t filling the canister too full prior to vacuum packaging. Always leave at least 7.5cm between the contents and the lid.
The FoodSaver® Storage Life with FoodSaver® Bottle Stopper will not vacuum:
•Make sure the Bottle Stopper is fitting snugly inside the bottle. If it is loose, air may leak in and prevent a vacuum fromforming.
•Make sure the neck of the bottle and tip of the Accessory Hose are free from food materials, crumbs, etc. Any gaps created by food etc, will prevent a vacuum from forming:
NOTE : For all accessories, make sure the Accessory Hose is completely inserted into appliance and lid of accessory. Twist grey tab on Accessory Hose while inserting to ensure a tight fit.
19