Brother LW6091001 appendix Adjusting the Label Length, Attaching Labels

Adjusting the Label Length

You can adjust the length of the printed label in levels of -5 to +5.

1Press the Setup key to display the setup menu, select "Adjust Length" using the

or key, and then press the OK or Enter key.

2Select "Adjust Length" by using the or key, and then set the value by using the or key.

3Press the OK or Enter key to apply the setting.

• Press the Escape key to return to the previous step.

• Press the Space key to set the value to default setting.

• Approximately 1% of the total label length will be adjusted by 1 level.

z LABEL PRINTING

Attaching Labels

1If necessary, trim the printed label to the desired shape and length using scissors, etc.

2Peel the backing from the label.

3Position the label and then press firmly from top to bottom with your finger to attach the label.

• The backing of some types of tapes may be pre-cut to make it easier to peel the backing.To remove the backing, simply fold the label lengthwise with the text facing inward, to expose the inside edges of the backing. Next, peel off the backing one piece at a time.

•Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel off easily from these surfaces.

•Be sure to read the instructions provided with Fabric Iron-On Tapes, Extra Strength Adhesive Tapes or other special tapes and observe all precautions noted in the instructions.

1

2

3

4

5

6

7

8

9

Adjusting the Label Length

59