KitchenAid Stealth Control Overview and
Programming Instructions (continued)
Recommended Setting
| Refrigerator |
|
|
|
|
|
| Lower | Raise |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
Back | Units | Select Zone | - | + | Confirm | ||||
| |||||||||
ICE MODE | LIGHT | TEMPERATURE | MAX ICE | LOCK | RESET FILTER | ||||
|
| Hold 3 Sec. |
| Hold 3 Sec. | Hold 3 Sec. | ||||
Figure 8
Adjusting Temperature Settings
Adjusting Temperature Settings
Press the LOCK pad to raise the temperature set point or press
Press the LOCK pad to raise the temperature set point or press the MAX ICE pad to lower the
thetemperatureMAX ICEsetpadpointto.lowerSee figurethe temperature8. set point. See figure 8.
Important:tant:Whenthethetemperatureis changed,is changed,the wordthe“ CONFIRM”word “ CONFIRM”above the lterabovereset padthe filter reset padillilluminatesnd willandFLASHwill FLASHwithoutwithoutan audibleantoneaudibleconstatonetlyconstantlyuntil user pressesuntil userRESETpressesFILTER,RESET FILTER,ICE MODEICEorMODEafter 60orsecondsafter 60of inasecondstivity. ofIf theinactivityuser presses. If theTEMPERATUREuser presses TEMPERATUREto change compartments, CONFIRM still flashes if one of the temps has been changed.
to change compartments, CONFIRM still lashesf if one of the temps has been changed. NOTE: To view Celsius temperatures, press the LIGHT button when adjust mode is activated. To NOTE: To view Celsius temperatures, press the LIGHT button when adjust mode is activat- return. the display setting to Fahrenheit, press LIGHT again
ed. To return the display setting to Fahrenheit, press LIGHT again.
.
|
| Recommended Setting |
|
|
| |||
| Freezer |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
| Lower | Raise | Save |
Back | Units | Select Zone | - | + | Confirm |
| ||
|
| |||||||
ICE MODE | LIGHT | TEMPERATURE | MAX ICE | LOCK | RESET FILTER | |||
|
| Hold 3 Sec. |
| Hold 3 Sec. | Hold 3 Sec. |
| ||
|
|
|
|
|
|
|
|
|
Figure 9
Freezer Temperature Setting
After viewing (and adjusting if desired) the refrigerator set point, press TEMPERATURE to change the display to show the freezer set point. When the zone has been changed, “FREEZER” appears on the display screen. Press LOCK to raise the set point, or press MAX ICE to lower the set point. When you have finished viewing (and adjusting if de- sired) both the refrigerator and freezer set points, press FILTER to save the settings. See figure 9.
*Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing.
23