KitchenAid Stealth Control Overview and Programming Instructions (continued)
Recommended Setting
| Refrigerator |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Back | Units | Select Zone | - | + |
| ||||
ICE MODE | LIGHT | TEMPERATURE |
| MAX ICE | LOCK | RESET FILTER | |||
|
| Hold 3 Sec. |
|
| Hold 3 Sec. | Hold 3 Sec. | |||
Figure 7
Adjusting Temperature Set Points:
Pressing and holding TEMPERATURE starts a 3 second countdown on the display. During the countdown using the dispenser cancels the countdown and no dispensing is permitted. The number ‘3’ blinks 3 times and an ‘invalid’ tone sounds 3 times. The user has to release both the pad and the button and then press the button again to start the countdown over.
During the countdown, pressing any other button or releasing the pad cancels the countdown and the ‘3’ blinks 3 times and the ‘invalid’ tone sounds 3 times. The user has to start over.
Note: The blinking and toning is synchronized so that the moment the number ‘3’ blinks, the tone is sounded. After 3 seconds, the TEMPERATURE shows up with the CURRENT refrigerator setting. See Figure 7.
Pressing TEMPERATURE changes between the refrigerator and freezer compart- ments and displays the current setting. Pressing the ICE MODE pad or after 60 seconds of no activity, the display will revert back to the normal screen.
*Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing.
22