Control Assembly
WARDANGERING
Electrical Shock Hazard
Only authorized technicians should perform diagnostic voltage measurements.
After performing voltage measurements, disconnect power before servicing.
Failure to follow these instructions can result in death or electrical shock.
DANGERWARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
VoltageVoltageMeasureasurementSafe ySafetyInformationInformation
When performing live voltage measurements, you must do the following:
�Verify the controls are in the off position so that the appliance does not start when energized.
�Allow enough space to perform the voltage measurements without obstructions.
�Keep other people a safe distance away from the appliance to prevent potential injury.
�Always use the proper testing equipment.
�After voltage measurements, always disconnect power before servicing.
1.Unplug refrigerator or disconnect power.
2.
3.
4.
5.
*Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing.
15