KitchenAid Stealth Control Overview and Programming Instructions (continued)
Showroom Mode:
Pressing and holding LIGHT and MAX ICE starts a 3 second countdown. During the countdown, pressing any other button or releasing a pad cancels the countdown.
Details:
After 3 seconds, the control enters the showroom mode and the cooling system turns off. When in the showroom mode, COOLING OFF and WFI icons stay off all the time, while the Door Open icon appears whenever door is open, however there is no door open audible alert.
No ice or water dispensing is allowed , an ‘invalid’ tone sounds if a pad is pressed or pressed and held.
User is not allowed to turn cooling on or off. If attempted invalid tone sounds. Pressing ICE MODE toggles cubed and crushed,
Pressing LIGHT toggles off/on/dim ; lighting changes accordingly.
The user can enter the Temperature Setting menu, which works the same as previ- ously described and the temperature will be stored. However, the moment the show- room mode is exited, the temp will be set back to default.
After 1 minute in a temperature screen without activity the control returns to the nor- mal screen.
Please note that ‘Cooling is Off’ text will never be lit in the showroom mode Note: The UI never goes to sleep under any circumstances.
Exiting the Showroom Mode:
Pressing and holding LIGHT and MAX ICE again for 3 sec OR unplugging and plug- ging in the power cord exits the showroom mode and returns to normal operation.
*Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing.
30