KitchenAid Stealth Control Overview and Programming Instructions (continued)
Order
Replace
ICE MODE | LIGHT | TEMPERATURE | MAX ICE | LOCK | RESET FILTER |
|
| Hold 3 Sec. |
| Hold 3 Sec. | Hold 3 Sec. |
Figure 16
Water Filter Status Light:
The water filter status light will help you know when to change your water filter. When the dispenser control panel’s water filter status display changes to “ORDER,” this tells you that it is almost time to change the water filter cartridge.
Replace the water filter cartridge when the water filter status display changes to “REPLACE.” The filter should be replaced at least every 6 months, depending on your water quality and usage. Note: If water flow to your water dispenser or ice maker decreases noticeably, change the filter sooner.
After changing the water filter, reset the status light.
Details:
Pressing and holding RESET FILTER starts the 3 second countdown. Using the dis- penser cancels the countdown and no dispensing is permitted. The number ‘3’ blinks 3 times and the ‘invalid’ tone sounds 3 times and user has to release both the pad and the button and press the button again to start it over
After 3 seconds, the BLUE WATER BARS in the Icon flash and an audible tone will not sound three times. When the system is reset, the “ORDER” and “REPLACE” icons will disappear from the display screen. See figure 16.
Note: Users can reset the filter status at any stage.
*Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing.
29