LED Indicators, Abnormal indication | QSC Audio CX108V specification

LED INDICATORS

The LED indicators can be used to monitor system operation and identify common problems.

POWER: A single GREEN LED, on left side of Gain Control group.

Normal indication: AC switch ON: LED will illuminate.

If no indication: Check AC power cord and AC outlet. Confirm that DataPort 1-2 is not holding the amp in 'Standby' mode.

CLIP: RED, to the right of each Gain control.

Normal indication: illuminates whenever the amplifier is driven beyond full power. The resulting distortion corresponds to the brightness of the LED. Distortion that causes only brief flashing may not be audible.

-During muting, the LED fully illuminates. This occurs during normal "On-Off" muting.

Abnormal indication:

-Bright red illumination while the amp is being used indicates either thermal muting or a shorted output.

-If the amplifier overheats, the fan will run at full speed, and operation should resume within one minute. Allow the fan to run, and make sure the amplifier ventilation is ade- quate.

-A shorted or overloaded output circuit will cause excessive Clip flashing and possible overheating.

If distortion is audible without a Clip indication, the problem is either before or after the amplifier. Check for damaged speakers or overloaded signal source. The amplifier Gain control should be in the upper half of its range to prevent input overload.

SIGNAL: GREEN, under each Clip LED.

Normal indication: illuminates when the input signal exceeds -35 dB. As signal approaches full power, the LED will illuminate continuously.

If no indication: check Gain settings and increase gain if necessary. Check input connec- tions and audio source for signal. If the Clip LED illuminates with little or no Signal indi- cation, check the output wiring for shorts.

Abnormal indication: If the Signal LED illuminates with no signal input, there may be system oscillations or some other malfunction. Disconnect the load and fully reduce the gain. If the signal LED remains on, the amp may need servicing.

BRDG and PAR : Each channel pair has a YELLOW LED for Bridge Mode, and an ORANGE LED for Parallel mode. These show how the rear panel switches are set (see page 5). In Stereo mode, both LEDs should be OFF.

Channel-pair control and indicator group on the CX108V. Power LED is to the left of Ch.1-Ch.2.

CX108V specifications

The QSC Audio CX108V is a powerful and versatile amplifier designed for commercial audio applications, particularly in environments such as retail spaces, restaurants, and other venues where high-quality sound is essential. Known for its reliability and performance, the CX108V has become a preferred choice for integrators and sound professionals alike.

One of the main features of the CX108V is its ability to deliver high power output while maintaining exceptional audio quality. With a power rating of 1000 watts at 4 ohms, the amplifier is capable of driving a wide range of loudspeakers with ease. Its efficient Class D amplifier design ensures low heat generation and prolonged operational life, making it a perfect fit for installations that require continuous use.

Another notable characteristic of the CX108V is its lightweight and compact design, which simplifies the installation process. Weighing in at just 7.6 kg (16.8 lbs), the amplifier can be easily mounted in various locations, whether on a rack, shelf, or wall. This portability does not come at the expense of durability, as the chassis is built from robust materials to withstand the rigors of a commercial environment.

The CX108V is equipped with a range of input options, including balanced XLR and TRS connectors, allowing for easy integration with various audio sources. Additionally, the amplifier features a precision feedback circuitry that enhances its overall performance, ensuring consistent audio delivery even at high volumes. Built-in protections such as over-temperature and short-circuit protection ensure reliable operation, minimizing downtime in critical environments.

QSC’s advanced DSP technology further enhances the capabilities of the CX108V. The amplifier includes programmable signal processing features that allow for tailored audio management, including EQ settings, crossover adjustments, and delay configurations. This flexibility makes it suitable for a variety of installation scenarios, enabling sound professionals to fine-tune the audio experience to meet specific needs.

In summary, the QSC Audio CX108V is a remarkable amplifier that combines power, efficiency, and intelligibility. Its lightweight design, robust protection features, and advanced DSP capabilities make it a go-to choice for audio professionals seeking high-performance solutions for commercial audio applications. With the CX108V, QSC Audio continues its tradition of delivering products that not only meet but exceed expectations in sound quality and reliability.