Whirlpool WRT359SFYW Door Features, Door Rails, Door Bins, Utility Compartment and Can Caddy

Page 13

2. Replace the shelf by tilting the back end downward to align

Style 2 - Trivets

the back shelf tab under the track on each side of the freezer.

 

Gently push the shelf into the freezer until the two center shelf

 

tabs are positioned within the opening in each track. Lower

 

the shelf to rest on the shelf tracks.

 

Frozen Food Storage Guide

Storage times will vary according to the quality and type of food, the type of packaging or wrap used (should be airtight and moisture-proof), and the storage temperature. Seal the package or container securely to avoid taste and odor transfer throughout the product. Ice crystals inside a sealed package are normal. This simply means that moisture in the food and air inside the package have condensed, creating ice crystals.

Put no more unfrozen food into the freezer than will freeze within 24 hours (no more than 2 to 3 lbs of food per cubic foot [907 to 1,350 g per L] of freezer space). Leave enough space in the freezer for air to circulate around packages. The freezer door must close tightly.

NOTE: For more information on preparing food for freezing, check a freezer guide or reliable cookbook.

DOOR FEATURES

Your model may have some or all of these features.

Door Rails

The door rails may be removed for easier cleaning.

Snap on Door Rails on some models)

To remove and replace the rails:

1.Remove the door rails by pushing in slightly on the front of the bracket while pulling out on the inside tab. Repeat these steps for the other end.

2.Replace the rails by aligning the ends of the brackets with the buttons on the sides of the door liner. Firmly snap bracket and assembly onto the tabs above the shelf as shown.

Style 1 - Door Rails

Door Bins

(on somemodels)

To remove and replace the racks/bins:

1.Remove the rack/bin by lifting it and pulling it straight out.

2.Replace the rack/bin by sliding it in above the desired support and pushing it down until it stops.

Utility Compartment and Can Caddy

To remove and replace the utility compartment:

1.Remove the utility compartment by raising and holding the cover up while lifting the utility compartment up and pulling it straight out.

2.Replace the utility compartment by sliding it in above the desired support and pushing it down until it stops.

To remove and replace the can caddy:

1.Hold the can caddy with one hand and pull up until it is released from the door liner. Then, pull up on the caddy again, until the stoppers have been overcome.

2.Pull the can caddy straight out to remove it from the door.

3.Replace the can caddy by aligning the grooves on the sides with the pins in the door liner. Push up on the bottom of the caddy until the stoppers have been overcome, and slide it fully into the compartment.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Refrigerator User Instructions Refrigerator SafetyRemove the Packaging Clean Before Using Installation InstructionsUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements LocationRequirementsRecommended Grounding Method Connect the Water Supply Water Supply RequirementsReverse Osmosis Water Supply Tools NeededStyle 1-Standard Doors Refrigerator DoorsCabinet Freezer DoorStyle 2-Contour Doors Refrigerator DoorPlastic Handles Extend from the Door on some models Cabinet DoorsStyle 1-Standard Door Door Removal ReplacementStyle 2-Contour Door Door Removal Door Swing Reversal optional ReplacementInstall Air Filter Adjust the DoorsStyle 1 Install Manual Air Filter Status Indicator Filters Reset on some models Using the ControlsCONDITION/REASON Adjustment Refrigerator USERefrigerator Shelves Refrigerator FeaturesMeat Drawer CrisperWire Freezer Shelf Freezer FeaturesGlass Freezer Shelf Style 1 Plastic CoverDoor Rails Door FeaturesDoor Bins Utility Compartment and Can CaddyWater Filtration System Ice MakerTo Clean Your Refrigerator CleaningRefrigerator Care Changing the Light BulbsTemperature and Moisture TroubleshootingRefrigerator Operation Iceand Water AccessoriesWater Filtration System Performance Data SheetItems Excluded from Warranty Limited WarrantyThis limited warranty does not cover Disclaimer of Implied WarrantiesEL Usuario DEL Refrigerador Seguridad DEL RefrigeradorDesempaque el refrigerador Instrucciones DE InstalaciónRequisitos de ubicación Antes de tirar su viejo refrigerador o congeladorRequisitos del suministro de agua Requisitos eléctricosMétodo de conexión a tierra recomendado Suministro de agua de ósmosis inversaConexión a la línea de agua Conexión del suministro de aguaConexión al refrigerador Cómo terminar la instalaciónEstilo 1 Puertas estándar Puertas del refrigeradorCarcasa Puerta del congeladorPuertas Estilo 2 Puertas contorneadasCómo volver a poner las puertas y las bisagras en su lugar Pasos finalesEstilo 1 Puerta estándar Cómo quitar y volver a poner la puerta en su lugarEstilo 2 Puerta contorneada Cambio del sentido de abertura de las puertas opcionalInstalación del filtro de aire Ajustelas puertasCONDICIÓN/MOTIVO Ajuste Uso de los controlesEstantes delrefrigerador RefrigeradorCajónpara carnes Reposición de los filtros en algunos modelosCajónpara verduras Características DEL CongeladorEstantede alambre del congelador Estante de vidrio del congeladorRieles de la puerta Características DE LA PuertaRecipientes de la puerta Compartimiento de uso general y portalatasSistema de filtración de agua Fábrica de hieloCómo cambiar los focos LimpiezaPara limpiar su refrigerador Estilo 1 Control electrónicoFuncionamiento delrefrigerador Solución DE ProblemasTemperatura y humedad AccesoriosHielo y agua Sistema de filtración de agua Hoja DE Datos DEL RendimientoGarantía Limitada Whirlpool CorporationExclusiones DE LA Garantía Esta garantía limitada no cubreWhirlpool Brand Home Appliances Réfrigérateur Sécurité DU RéfrigérateurExigences demplacement Instructions DinstallationDéballagedu réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurSpécificationsélectriques Méthode recommandée de mise à la terreSpécifications del’alimentationen eau Alimentation en eau par osmose inverseRaccordement de la canalisation deau Achever l’installationRaccordement à une canalisation d’eau Raccordement au réfrigérateurStyle 1 Portes standard Portes du réfrigérateurCaisse Porte du congélateurStyle 2 Portes contour Réinstallation Portes et charnièresPortes Étapes finalesStyle 1-Porte standard Démontage et réinstallation De la portePoignée en plastique Style 2 Porte contourAjustement desportes Installationdu filtre à airUtilisation DU Réfrigérateur Utilisation des commandesCONDITION/RAISON Ajustement Tablettes du réfrigérateur RéfrigérateurTiroir à viande Bac à légumes Caractéristiques DU CongélateurTablette métallique ducongélateur Tablette enverre du congélateurTringles dans la porte LA PorteBalconnets de porte CompartimentutilitaireetcompartimentàcanettesSystème defiltrationde leau Machine à glaçonsStyle 1 Commande électronique Remplacement des ampoules d’éclairageEntretien DU Réfrigérateur NettoyageFonctionnement du réfrigérateur DépannageLe réfrigérateur ne fonctionne pas Le moteur semble trop tournerTempérature et humidité AccessoiresGlaçons et eau Système de filtration d’eau Feuille DE Données SUR LA PerformanceGarantie Limitée Garantie DE Gros Appareil Ménager Whirlpool CorporationÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasPage Whirlpool Corporation All rights reserved W10359300A EN/FR PN W10343810A

WRT351SFYF, WRT359SFYF, WRT138TFYS, WRT311SFYT, WRT311SFYB specifications

Whirlpool has long been synonymous with innovative home appliances, and the models W10359300A, WRT359SFYW, WRT359SFYM, WRT359SFYB, and WRT311SFYW are exemplary of their commitment to quality and functionality in refrigeration. Each model offers a unique blend of features, technologies, and design characteristics that cater to diverse household needs.

The Whirlpool W10359300A is a versatile refrigerator cover, designed to provide extra protection and extend the lifespan of your appliance. Its durable construction ensures it withstands daily wear and tear, making it an excellent investment for maintaining the aesthetic and functionality of your refrigerator.

On the other hand, the models WRT359SFYW, WRT359SFYM, and WRT359SFYB are sleek and stylish top-freezer refrigerators that combine practicality with modern design. These models feature a generous storage capacity, allowing families to store ample groceries while keeping them organized. The adjustable shelves provide flexibility, enabling users to customize the interior space to fit larger items, such as tall bottles or stacked containers.

The WRT359SF series also boasts the industry-favored stainless steel finish, which not only complements contemporary kitchen decor but also ensures easy cleaning. The Fingerprint-Resistant feature on these models allows for a polished look without the hassle of smudges or streaks.

As for the advanced technology incorporated in these refrigerators, one of the highlights is the Adaptive Defrost system. This intelligent technology helps save energy by determining the need for defrosting based on usage patterns, contributing to enhanced energy efficiency. Additionally, the ENERGY STAR certification ensures that these models operate efficiently, resulting in lower energy bills and a reduced environmental footprint.

Meanwhile, the WRT311SFYW offers similar benefits with its straightforward design and efficient performance. This model is particularly popular for its simple yet effective features, catering to users who prefer functionality over bells and whistles.

In summary, the Whirlpool W10359300A, WRT359SFYW, WRT359SFYM, WRT359SFYB, and WRT311SFYW models represent a convergence of style, efficiency, and innovative technology. Designed for the modern household, they not only meet but exceed the expectations of consumers looking for reliable refrigeration solutions. Whether you’re looking for advanced features or straightforward functionality, Whirlpool has you covered with these quality appliances.
Top Page Image Contents