Whirlpool WRT311SFYW Water Supply Requirements, Connect the Water Supply, Tools Needed

Page 4

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

■

Flat-blade screwdriver

■

¹⁄₄" Nut driver

■

⁷⁄₁₆" and ¹⁄₂" Open-end or two

■

¹⁄₄" Drill bit

 

adjustable wrenches

■

Cordless drill

 

 

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆"

(4.76 mm) saddle valve which reduces water flow and clogs more easily.

IMPORTANT:

■All installations must meet local plumbing code requirements.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

Water Pressure

A cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and

827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

■Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

■Allow the storage tank on the reverse osmosis system to refill after heavy usage.

If you have questions about your water pressure, call a licensed, qualified plumber.

Connect the Water Supply

Read all directions before you begin.

IMPORTANT: If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.

Connect to Water Line

1.Unplug refrigerator or disconnect power.

2.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

3.Locate a ½" to 1¹⁄₄" (1.25 cm to 3.18 cm) vertical cold water pipe near the refrigerator.

IMPORTANT:

■Make sure it is a cold water pipe.

■Horizontal pipe will work, but drill on the top side of the pipe, not the bottom. This will help keep water away from the drill and normal sediment from collecting in the valve.

4.Determine the length of copper tubing you need. Measure from the connection on the lower left rear of refrigerator to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use ¹⁄₄" (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5.Using a cordless drill, drill a ¹⁄₄" hole in the cold water pipe you have selected.

 

A

G

B

 

 

C

F E

D

A. Cold water pipe

E. Compression sleeve

B. Pipe clamp

F. Shutoff valve

C. Copper tubing

G. Packing nut

D. Compression nut

 

6.Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the ¹⁄₄" drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so washer makes a watertight seal. Do not overtighten or you may crush the copper tubing.

7.Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten.

8.Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.

Connect to Refrigerator

1.Unplug refrigerator or disconnect power.

2.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

3.Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid damage to the tubing when the refrigerator is pushed back against the wall.

4.Turn shutoff valve ON.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Refrigerator Safety Refrigerator User InstructionsInstallation Instructions Remove the Packaging Clean Before UsingUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements LocationRequirementsRecommended Grounding Method Water Supply Requirements Connect the Water SupplyReverse Osmosis Water Supply Tools NeededRefrigerator Doors Style 1-Standard DoorsCabinet Freezer DoorRefrigerator Door Style 2-Contour DoorsPlastic Handles Extend from the Door on some models Cabinet DoorsDoor Removal Replacement Style 1-Standard DoorDoor Removal Door Swing Reversal optional Replacement Style 2-Contour DoorInstall Air Filter Adjust the DoorsStyle 1 Install Manual Air Filter Status Indicator Using the Controls Filters Reset on some modelsCONDITION/REASON Adjustment Refrigerator USERefrigerator Features Refrigerator ShelvesMeat Drawer CrisperFreezer Features Wire Freezer ShelfGlass Freezer Shelf Style 1 Plastic CoverDoor Features Door RailsDoor Bins Utility Compartment and Can CaddyIce Maker Water Filtration SystemCleaning To Clean Your RefrigeratorRefrigerator Care Changing the Light BulbsTemperature and Moisture TroubleshootingRefrigerator Operation Accessories Iceand WaterPerformance Data Sheet Water Filtration SystemLimited Warranty Items Excluded from WarrantyThis limited warranty does not cover Disclaimer of Implied WarrantiesSeguridad DEL Refrigerador EL Usuario DEL RefrigeradorInstrucciones DE Instalación Desempaque el refrigeradorRequisitos de ubicación Antes de tirar su viejo refrigerador o congeladorRequisitos eléctricos Requisitos del suministro de aguaMétodo de conexión a tierra recomendado Suministro de agua de ósmosis inversaConexión del suministro de agua Conexión a la línea de aguaConexión al refrigerador Cómo terminar la instalaciónPuertas del refrigerador Estilo 1 Puertas estándarCarcasa Puerta del congeladorEstilo 2 Puertas contorneadas PuertasCómo volver a poner las puertas y las bisagras en su lugar Pasos finalesCómo quitar y volver a poner la puerta en su lugar Estilo 1 Puerta estándarCambio del sentido de abertura de las puertas opcional Estilo 2 Puerta contorneadaAjustelas puertas Instalación del filtro de aireUso de los controles CONDICIÓN/MOTIVO AjusteRefrigerador Estantes delrefrigeradorCajónpara carnes Reposición de los filtros en algunos modelosCaracterísticas DEL Congelador Cajónpara verdurasEstantede alambre del congelador Estante de vidrio del congeladorCaracterísticas DE LA Puerta Rieles de la puertaRecipientes de la puerta Compartimiento de uso general y portalatasFábrica de hielo Sistema de filtración de aguaLimpieza Cómo cambiar los focosPara limpiar su refrigerador Estilo 1 Control electrónicoSolución DE Problemas Funcionamiento delrefrigeradorTemperatura y humedad AccesoriosHielo y agua Hoja DE Datos DEL Rendimiento Sistema de filtración de aguaWhirlpool Corporation Garantía LimitadaExclusiones DE LA Garantía Esta garantía limitada no cubreWhirlpool Brand Home Appliances Sécurité DU Réfrigérateur RéfrigérateurInstructions Dinstallation Exigences demplacementDéballagedu réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurMéthode recommandée de mise à la terre SpécificationsélectriquesSpécifications del’alimentationen eau Alimentation en eau par osmose inverseAchever l’installation Raccordement de la canalisation deauRaccordement à une canalisation d’eau Raccordement au réfrigérateurPortes du réfrigérateur Style 1 Portes standardCaisse Porte du congélateurRéinstallation Portes et charnières Style 2 Portes contourPortes Étapes finalesDémontage et réinstallation De la porte Style 1-Porte standardStyle 2 Porte contour Poignée en plastiqueInstallationdu filtre à air Ajustement desportesUtilisation DU Réfrigérateur Utilisation des commandesCONDITION/RAISON Ajustement Tablettes du réfrigérateur RéfrigérateurTiroir à viande Caractéristiques DU Congélateur Bac à légumesTablette métallique ducongélateur Tablette enverre du congélateurLA Porte Tringles dans la porteBalconnets de porte CompartimentutilitaireetcompartimentàcanettesMachine à glaçons Système defiltrationde leauRemplacement des ampoules d’éclairage Style 1 Commande électroniqueEntretien DU Réfrigérateur NettoyageDépannage Fonctionnement du réfrigérateurLe réfrigérateur ne fonctionne pas Le moteur semble trop tournerTempérature et humidité AccessoiresGlaçons et eau Feuille DE Données SUR LA Performance Système de filtration d’eauGarantie DE Gros Appareil Ménager Whirlpool Corporation Garantie LimitéeÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasPage W10359300A EN/FR PN W10343810A Whirlpool Corporation All rights reserved

WRT351SFYF, WRT359SFYF, WRT138TFYS, WRT311SFYT, WRT311SFYB specifications

Whirlpool has long been synonymous with innovative home appliances, and the models W10359300A, WRT359SFYW, WRT359SFYM, WRT359SFYB, and WRT311SFYW are exemplary of their commitment to quality and functionality in refrigeration. Each model offers a unique blend of features, technologies, and design characteristics that cater to diverse household needs.

The Whirlpool W10359300A is a versatile refrigerator cover, designed to provide extra protection and extend the lifespan of your appliance. Its durable construction ensures it withstands daily wear and tear, making it an excellent investment for maintaining the aesthetic and functionality of your refrigerator.

On the other hand, the models WRT359SFYW, WRT359SFYM, and WRT359SFYB are sleek and stylish top-freezer refrigerators that combine practicality with modern design. These models feature a generous storage capacity, allowing families to store ample groceries while keeping them organized. The adjustable shelves provide flexibility, enabling users to customize the interior space to fit larger items, such as tall bottles or stacked containers.

The WRT359SF series also boasts the industry-favored stainless steel finish, which not only complements contemporary kitchen decor but also ensures easy cleaning. The Fingerprint-Resistant feature on these models allows for a polished look without the hassle of smudges or streaks.

As for the advanced technology incorporated in these refrigerators, one of the highlights is the Adaptive Defrost system. This intelligent technology helps save energy by determining the need for defrosting based on usage patterns, contributing to enhanced energy efficiency. Additionally, the ENERGY STAR certification ensures that these models operate efficiently, resulting in lower energy bills and a reduced environmental footprint.

Meanwhile, the WRT311SFYW offers similar benefits with its straightforward design and efficient performance. This model is particularly popular for its simple yet effective features, catering to users who prefer functionality over bells and whistles.

In summary, the Whirlpool W10359300A, WRT359SFYW, WRT359SFYM, WRT359SFYB, and WRT311SFYW models represent a convergence of style, efficiency, and innovative technology. Designed for the modern household, they not only meet but exceed the expectations of consumers looking for reliable refrigeration solutions. Whether you’re looking for advanced features or straightforward functionality, Whirlpool has you covered with these quality appliances.
Top Page Image Contents