Whirlpool W10270322A Style 2 Direct wire strain relief, Removable retaining nut Strain relief

Style 2: Direct wire strain relief	■ Assemble a UL listed conduit connector in the opening.
■ Use Phillips screwdriver to remove screws and slide
cord/conduit plate down and out.

■Position cord/conduit plate as shown in the following illustration.

■Replace cord/conduit plate and insert screws.

A

B

A. Removable retaining nut

B. Strain relief

■Feed the flexible conduit through the strain relief, allowing enough slack to easily attach wiring to the terminal block.

■Tighten strain relief screw against the flexible conduit.

5.Replace back panel and screws on rear of range.

6.Complete installation following instructions for your type of electrical connection:

4-wire(recommended)

3-wire(if 4-wire is not available)

9