Whirlpool AKZM 788 manual Declaration of Conformity, Troubleshooting Guide, AFTER-SALES Service

Page 6

Energy saving

-Only pre-heat the oven if specified in the cooking table or your recipe.

-Use dark lacquered or enamelled baking moulds as they absorb heat far better.

-Switch the oven off 10/15 minutes before the set cooking time. Food requiring prolonged cooking will continue to cook even once the oven is switched off.

DECLARATION OF CONFORMITY

-This oven, which is intended to come into contact with foodstuffs, complies with European Regulation () n.1935/2004 and has been designed, manufactured and sold in conformity with the safety requirements of the “Low Voltage” directive 2006/95/CE (which replaces 73/23/CEE and subsequent amendments), the protection requirements of “EMC” 2004/108/CE.

TROUBLESHOOTING GUIDE

The oven does not work:

Check for the presence of mains electrical power and if the oven is connected to the electrical supply.

Turn off the oven and restart it to see if the fault persists.

The electronic programmer does not work:

If the display shows the letter “” followed by a number, contact your nearest After-sales Service. Specify in this case the number that follows the letter “”.

AFTER-SALES SERVICE

Before calling the After-Sales Service:

1.See if you can solve the problem yourself with the help of the suggestions given in the “Troubleshooting guide“.

2.Switch the appliance off and back on again it to see if the fault persists.

If after the above checks the fault still occurs, get in touch with the nearest After-sales Service. Always specify:

a brief description of the fault;

the type and exact model of the oven;

the service number (number after the word Service on the rating plate), located on the right hand edge of the oven cavity (visible when the oven door is open). The service number is also indicated on the guarantee booklet;

your full address;

your telephone number.

If any repairs are required, please contact an authorised After-sales Service (to guarantee that original spare parts will be used and repairs carried out correctly).

CLEANING

WARNING

- Never use steam cleaning equipment.

- Only clean the oven when it is cool to the touch.

 

 

 

- Disconnect the appliance from the power supply.

Oven exterior

IMPORTANT: do not use corrosive or abrasive detergents. If any of these products accidentally comes into contact with the appliance, clean immediately with a damp cloth.

Clean the surfaces with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. Finish off with a dry cloth.

GB4

Image 6
Contents User and maintenance manual Page Important Safety Instructions Your Safety and That of Others is ParamountGB2 Preparing the Housing Unit InstallationSafeguarding the Environment Electrical ConnectionCleaning Troubleshooting GuideAFTER-SALES Service Declaration of ConformityMaintenance Removing the DoorMoving the TOP Heating Element Some Models only Replacing the Oven Lamp To replace the rear lamp if presentTo replace the side lamp if present Accessories Supplied Accessories not SuppliedInstructions for Oven USE Inserting Wire Shelves and Other Accessories in the Oven Control Panel DescriptionList of Functions Description of Display Starting the Oven Setting the TimeSetting the TEMPERATURE/OUTPUT of the Grill Selecting Cooking FunctionsFast Preheating Setting Cooking TimeSetting END of Cooking TIME/START Delayed Indication of the Residual Heat Inside the OvenSelecting Special Functions TimerKEY-LOCK BrowningSetting BREAD/PIZZA Function SelectionSettings BREAD/PIZZA Fast Preheating Function Description TableCooking Tables Lasagna / Baked Vols-au-vent / PuffPastry crackers FlansLasagna & Meat Meat & PotatoesFish & Vegetables DIN 3360-1207 § DIN 3360-1207 annex CEnergy efficiency class according to EN Recommended USE and Tips Page 5019 310