Whirlpool 8900 manual Signal lights

Page 11

Hi-Temp Wash option

If the Hi-Temp Wash option is selected, water is heated in the dishwasher during the main wash of the Heavy Wash, Normal Wash, Light Wash and China Crystal cycles to improve washability. The Hi-Temp Wash option is automatically selected for the Pots

&Pans cycle. See “Cycle selection chart” on pages 8-10.

Lo-Energy Rinse option

If the Lo-Energy Rinse option is selected, water is not heated in the dishwasher during the final rinse of the Heavy Wash, Normal Wash, Light Wash and China Crystal cycles. The Lo-Energy Rinse option cannot be selected with the Pots & Pans cycle. See “Cycle selection chart” on pages 8-10.

NOTE:This option will reduce the amount of electricity used to run the dishwasher, but may result in slower drying and some spotting on dishes. For best drying and rinsing results, use a liquid rinse agent.

Air

Dry

option

 

If the

Air

Dry option is selected, air in the

SELECT

dishwasher is not heated during the “dry” part of the cycle. Using this option helps save energy, but dishes take longer to dry (overnight) and some water spotting may result. Some items (such as plastics) may need towel drying. For best drying results, use a liquid rinse agent.

The signal lights

Delay signal light

The DELAY signal light will glow when a delay start time has been set. It will also glow while the dishwasher has paused to heat water (see above).

Water heating signal light

The WATER HEATING signal light will glow while the dishwasher is heating water for a cycle. See cycle selection chart on pages 8-10.

Clean signal light

The CLEAN signal light will glow when a washing cycle is complete. To turn it off, turn the Cycle Control knob clockwise slightly until the light goes off.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Series Dishwashers Thank you for buying a WhirlpooP appliance Your safety is important to usHelp us help you Important Safety InstructionsParts And Features Cycle control knob ButtonsThis Section MIml~mg0 l D1 Using Your DishwasherBefore starting your dishwasher Starting your dishwasherAdding a dish during a cycle Starting your dishwasher using delay washChanging an option Changing a cycle settingCanceling a cycle Cycle selection chartMain Time Cycle Wash Rinse Wash Rinse Does not move What happens in eachOption Signal lights Cover Using the detergent dispenserWhat type of detergent to use Detergent dispenserTo check dispenser Using the rinse agent dispenserHow much detergent to use Rinse agent dispenserOn some models Quiet operating tipsTo fill dispenser Energy saving tips Water temperature tipsTo check water temperature Special tips on dishwasher use Cup and glass load Loading Your DishwasherPreparing to load the dishwasher Loading the top rackUtensil load Infinite adjustable top rackLoading the bottom rack Mixed loadPersonal Injury Hazard Loading the silverware basketFold down divider To open the basket Loading the cutlery basketTo remove the basket To replace the basketCaring For Your Dishwasher Cleaning the exteriorCleaning the interior Problem Cause Common Dishwashing ProblemsSolution chart Solution Removing spots and film ProblemCauseSolutionBefore calling for assistance If You Need Assistance Or ServiceIf you need FSP replace- ment parts If you need serviceIf you are not satisfied with how the problem was solved If you need assistancePower Cleantm washing system parts covered by your warranty Part no Rev. a Whirlpool
Top Page Image Contents