Using Cancel/Drain, Selecting cycle options

HIGH

TEMP

WASH

AIR DRY

POWER

SCOUR

SANI

RINSE

SETTING THE CONTROLS

Using Cancel/Drain

Press Cancel/Drain to cancel a cycle or clear option selections.

CANCEL

DRAIN

To cancel a cycle:

•Press Cancel/Drain while the dishwasher is running to start a 2-minute drain. It will take a few seconds for the drain to start. If desired, select a new cycle. (See the “Changing a cycle or an option setting” section.)

•You can press Cancel/Drain again to stop the drain immediately. Remember to drain the dishwasher again before starting a new cycle.

NOTE: A small amount of water remaining in the dishwasher is normal.

To clear the cycle indicators:

Press Cancel/Drain before starting the dishwasher.

Selecting cycle options

You can press an Option pad after the dishwasher starts as long as the cycle is not past the point that the option is used. For example, you can press Air Dry any time before the Drying indicator glows.

After a wash cycle, the dishwasher remem- bers the options used and uses the same options in the next wash cycle unless new options are selected or the Cancel/Drain pad is pressed.

POWER SCOURTM feature

(on some models)

When POWER SCOUR is selected the dish-

washer heats the water during several portions of the Normal, Heavy, and Pots-N-Pans cycles. Heating the water helps improve washing results. The Pots-N-

Pans cycle, with POWER SCOUR is recommended for baked-on soil.

High Temp Wash

(on some models)

When High Temp Wash is selected, the

dishwasher heats the water to 140°F (60°C) during the main wash of the Low Energy, China, Normal and Heavy

cycles. Heating the water helps improve washing results. The Pots-N-Pans cycle automatically uses High Temp washes.

SANI RINSETM option

(on some models)

Selecting the SANI RINSE option raises the

water temperature in the final rinse to 150°F (65°C). SANI RINSE is an option with the Pots-N-Pans, Heavy, Normal,

Low Energy and China cycles. Depending on the incoming temperature of your water, cycle times might be longer when you select

SANI RINSE.

NOTE: SANI RINSE raises the temperature of the final rinse to 150°F (65°C), and main- tains that temperature 9 minutes. This high temperature rinse sanitizes your dishes and glassware.

Air Dry

When Air Dry is selected, the air in the

dishwasher is not heated during the “dry” portion of a cycle. Using Air Dry helps save energy, but dishes take longer to dry and

some spotting can occur. Some items (such as plastics) may need towel drying. For best drying, use a liquid rinse agent.

NOTE: The dishwasher automatically heats the air in the dishwasher during the “dry” portion of the cycle unless you select Air Dry.