Whirlpool 980 warranty Changing a cycle or option setting, Adding items during a cycle

ADD-

A-DISH

SETTING THE CONTROLS

Changing a cycle or option setting

During the first minute of a cycle

1.Press new Cycle and/or Option pads.

2.Check the detergent dispensers. They must be filled properly for the new cycle.

After the first minute of a cycle

1.Press Cancel/Drain. A 2-minute drain cycle starts. Wait for drain cycle to finish.

2.Press a new Cycle pad.

3.If desired, press one or more Option pad(s).

4.Check the detergent dispensers. They must be filled properly for the new cycle.

Adding items during a cycle

1.Lift up the door latch to stop the cycle. Wait for spraying action to stop before opening the door.

2.Open the door and add the item.

3.Close the door, but do not latch it. Wait 30 seconds for the air in the dishwasher to warm up. Doing so reduces the amount of moisture in the vent when restarting a cycle.

4.Close the door firmly until it latches. The dishwasher resumes the cycle.

For series 925 and 940 models:

You can add an additional item to the dish- washer anytime before the main portion of a cycle. See the “Selecting a wash cycle” chart.

For series 980 model:

You can add items to the dishwasher load anytime the Add-A-Dish indi- cator is on.

17