InstallationInstructions
Before you begin operating the oven, carefully read the following instructions.
Installing your microwave oven
1. Empty the microwave oven and clean inside it with a soft, damp cloth. Check for damage such as misaligned door, damage around the door or dents inside the oven or on the exterior. If there is any damage, do not operate the unit until it has been checked by an authorized WhirlpoolSM service technician and any repairs made.
2. Put the oven on a can, counter, table or shelf that is strong enough to hold the oven and the food and utensils you put in it. (The control side of the unit is the heavy side. Use care when handling.) The weight of the oven is approxi- mately 47 Ibs (21 .15 kg). The microwave oven should be at a temperature above 50°F (10°C) for proper operation.
Fire, Electrical Shock, Excessive Exposure
To Microwave Energy, Personal Injury and
Product Damage Hazard
Air intake
openings SUPPlY vents
cord
l Do not block the rear air intake openings or exhaust vents. Allow a few inches of space at back of oven where intake openings and exhaust vents are located. Blocking the air intake openings and exhaust vents can cause damage to the oven and poor cooking results. Make sure the microwave oven legs are in place to ensure proper airflow.
l Do not install the oven next to or over a heat source (for example, a cooktop or range)
without a
You can
These kits are available from your Whirlpool Dealer. If your dealer does not stock the kit it can be ordered by writing to:
Whirlpool | Corporation |
|
Attention: | Customer Service | Dept. |
1900 Whirlpool Drive |
| |
LaPone, | IN 46350 | 25 |