Display Backlight
Display backlight may be set to reduce brightness or to turn off during sleep mode (after 2 minutes of inactivity).
Sleep mode is an
To Set Display Backlight:
1.On Main Menu, touch “Settings & Info.”
2.Touch “Display Backlight.”
3.Select setting: reduce after 2 minutes or off after 2 minutes.
4.Touch “OK.”
Tones
Tones are audible signals, indicating the following:
One Tone
■Valid entry (short tone)
Two Tones
■Between stages (short tones)
■Reminder (long tones), repeat each minute for 10 minutes after the
■End of Timer countdown
■Hidden feature entered or exited (very short, quick tones)
Display Contrast
Display contrast has 11 settings, ranging from minimum to maximum.
To Set Display Contrast:
1.On Main Menu, touch “Settings & Info.”
2.Touch “Display Contrast.”
3.Using “+” and
4.Touch “OK.”
Learning Mode
The Learning Mode is ideal for learning how to use the oven. When set, functions can be entered, with real displays and tones, without actually turning on the microwave generator (magnetron) or the grill element. While functions are operating in the Learning Mode, the oven light will come on, the fan will run, and the turntable will rotate (if set ON).
While the Learning Mode is active, the Learn indicator is visible in the lower, left command area. The indicator is visible while the oven is in standby mode, during programming, and during Settings & Info menu navigation.
The Learning indicator shares the lower, left command area with the Timer countdown if both are in operation.
Three Tones
■Invalid entry (very short, quick tones)
■Retry Error
Four Tones
■End of cycle (2 short tones, followed by 2 longer tones)
■Interruption, tend to food (short tones)
■Attention - door needs to be opened and closed
To Adjust Tone Volume:
1.On Main Menu, touch “Settings & Info.”
2.On Settings & Info screen, touch “More Choices.”
3.Touch “Volume.”
4.Using “+” and
5.Touch “OK.”
Start
The START control will start any function.
If
Cook Method
Food Type
A
Time / Power | Most Used | ||
Kids Menu | Settings & |
| Info |
| |||
For added convenience, the “Start” touch pad is also available on some display screens, and provides the same function as the START control pad.
Cancel
The CANCEL control stops all functions except for the Timer and Learning Mode, and cancels programming in progress.
The oven will also turn off when the door is opened. Close the door and touch START control or “Continue” on the touch screen to resume the cycle. A sensor cooking cycle may not be resumed if interrupted by opening the door.
A. Learning mode indicator
To Activate Learning Mode:
The oven must be off.
1.On the Main Menu, touch “Settings & Info.”
2.On Settings & Info screen, touch “More Choices.”
3.Touch “Learning Mode.”
4.Touch “On” or “Off” to set.
5.Touch “OK.”
Clear
During programming, the CLEAR control changes the numeric programming values, such as minutes, seconds and cook power that are active in the display to their default value. For example, while entering a cook time, touching CLEAR will change the time you have already entered to “0:00.” The CLEAR control gives an invalid signal (see “Tones” section) if touched during cooking.
13