Whirlpool MW8901XS Cooking at Lower Cook Powers, Changing the Cooking Time In-use Reprogramming

Page 13

4.Touch START.

CDL& dQWtl

The oven will automatically cook at high Cook Power.

The COOK Indicator Light will stay on to show that the oven is cooking.

The Display counts down the time to show how much time is left in the first cycle.

When the cooking time ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a reminder tone will sound every 60 seconds until the door is opened or CANCEL is touched.

The Display will then show the time of day.

Changing the Cooking Time

(In-use Reprogramming]

Cooking time can be changed any time before touching START or during the cycle:

1.Touch COCK.

2.Touch numbers for the new time.

3.Touch START.

Cook will continue cooking for the new time.

Cooking at Lower Cook Powers

For best results, some recipes call for lower Cook Powers, The lower the Cook Power, the

slower the cooking. Each Number Pad also stands for a different percentage of Cook power, Many recipes in your MICRO MENUS” Cookbook tell you, by number, which Cook Power to use,

Recipes

in other

books

and

magazines

may tell

you by

name

(HI, MED, LO, etc.) or

 

percentage

(10% 50%,

80%,

etc.).

 

 

 

 

 

 

 

 

 

The following

chart

gives the

percentage

of Cook

Power

each

Number Pad stands

for, and

Cook Power name

usually used.

 

 

 

 

 

 

 

 

 

automatic

 

100%

of

full

power

HIGH

4

~

40%

of full power

 

 

9

~

90%

of full

power

 

3

 

30%

of full

power

MED-LOW

 

8

=

80%

of

full

power

 

2

7

20%

of

full power

 

 

7

=

70%

of full

power

MED-HIGH

1

=

10% of full

power

LOW

 

6

:

60%

of

full

power

 

0

 

no power

(fan and

light will be

off]

5 = 50% of full power MED

 

 

 

 

 

 

 

 

 

DO

THIS...

 

 

 

THIS HAPPENS...

 

 

 

 

 

1.Put food in the oven and close the door.

a.

m

2.Touch COOK.

The COOK Indicator Light will come on and the Display will show four 0’s.

continued on next page

13

Image 13
Contents Microwave Oven Parts and features ContentsBefore you use your microwave oven Before you install your microwave ovenImportant Safety Instructions Digital Display/Clock Indicator lights Using your microwave ovenCommand Pads Microwave Oven ControlsSetting the Clock Audible SignalsChanging the Minute Timer Using the Minute TimerCancelling the Minute Timer Cooking in Your Microwave Oven Using Auto SensorCook Frozen Do this Ii!!l Auto Sensor operating hints Cooking at High Cook PowerChanging the Cooking Time In-use Reprogramming Cooking at Lower Cook PowersPage Defrosting Changing the Cook PowerStanding Time Changing or Adding Defrost Time About the Quick Defrost CycleCooking Automatically After Defrosting Page Cooking with the Temperature Probe Probe Temp Changing the Temperature SettingTemperature Probe Cooking Tips Hints for Using the Temperature ProbeRemoving and Cleaning the Temperature Probe DON’T‘Using Pause with Quick Defrost Using PauseAdding Pause to Cycle in Operation Using Pause with Auto SensorPause is Automatic between Cook and Probe Temp To Automatically Follow Another Cycle Using Keep WarmUsing Auto Start Cook Additional Information Other Operating HintsBi-Level Cooking Rack Cleaning the RackInserting the Rack Installing Your Microwave Oven Installation instructionsElectrical requirements Grounding InstructionsBuilding in Your Microwave Oven Caring for your microwave oven Cleaning the Microwave OvenReplacing the Light Bulb How your microwave oven works Never Cook or Reheat a Whole EGG Operating safety precautionsGeneral information Before calling for assistance WARRANTYMworn