Whirlpool MW8900XS, MW8901XS manual Cooking at High Cook Power, Auto Sensor operating hints

Page 12

When SLOW COOK/SIMMER ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping

by opening the door or by touching CANCEL.) “End” will remain on the Dis- play and a reminder tone will sound every 60 seconds until the door is opened or CANCEL is touched. The Dis- play will then show the time of day.

NOTE: If food is removed from oven during KEEP WARM, touch KEEP WARM then CANCEL to cancel remainder of the time.

AUTO SENSOR operating hints

l l l l l

l

l

l

l

ALL AUTO SENSOR cooking categories have preset Cook Powers.

The COOK POWER Indicator Light does not come on during AUTO SENSOR Cycles. No Cook or Temperature cycles can be used with AUTO SENSOR Cycles,

Auto Start may be used with AUTO SENSOR Cycles.

Quick Defrost and Keep Warm may be selected with Cook/Reheat or Cook Frozen

only. Keep Warm is automatic at the end of Slow/Cook/Simmer cycle.

Pause may be used with Cook/Reheat or Cook Frozen only. It will stop the oven between the first and second part of the cycle. See “Using PAUSE:’ page 20.

In Cook/Reheat and Cook Frozen “AS-#” will show on the Display until the oven calcu- lates and begins counting down the remaining cooking time, except ‘AS-I” which stops after the first part of the cooking cycle.

The AUTO SENSOR Indicator Light goes off at the end of the first part of the Slow Cook/Simmer cycle.

“Err”will show on the Display if the door is opened during the first part of any AUTO SENSOR cycle. “Err”will also show on the Display if AUTO SENSOR malfunctions. Open the door and touch CANCEL to clear the Display. Do not reset AUTO SENSOR. The food may over or undercook. To finish cooking food, estimate the remaining cooking time. Reset

the oven using the COOK cycle and approximate Cook Power setting.

Cooking at High Cook Power

DO THIS...

THIS HAPPENS...

1Put food in the oven and close the door.

2.Touch COOK.

3.Touch Number Pads for the cooking time you want.

The COOK Indicator Light will come on and the Display will show four 0’s.

The Display will show the numbers you touched in the order you touched them. The example shows 1 minute, 30 seconds.

12

Image 12
Contents Microwave Oven Contents Parts and featuresBefore you install your microwave oven Before you use your microwave ovenImportant Safety Instructions Using your microwave oven Digital Display/Clock Indicator lightsCommand Pads Microwave Oven ControlsAudible Signals Setting the ClockUsing the Minute Timer Changing the Minute TimerCancelling the Minute Timer Using Auto Sensor Cooking in Your Microwave OvenCook Frozen Do this Ii!!l Cooking at High Cook Power Auto Sensor operating hintsCooking at Lower Cook Powers Changing the Cooking Time In-use ReprogrammingPage Changing the Cook Power DefrostingStanding Time About the Quick Defrost Cycle Changing or Adding Defrost TimeCooking Automatically After Defrosting Page Cooking with the Temperature Probe Changing the Temperature Setting Probe TempHints for Using the Temperature Probe Temperature Probe Cooking TipsRemoving and Cleaning the Temperature Probe DON’TUsing Pause ‘Using Pause with Quick DefrostUsing Pause with Auto Sensor Adding Pause to Cycle in OperationPause is Automatic between Cook and Probe Temp Using Keep Warm To Automatically Follow Another CycleUsing Auto Start Cook Other Operating Hints Additional InformationCleaning the Rack Bi-Level Cooking RackInserting the Rack Installation instructions Installing Your Microwave OvenGrounding Instructions Electrical requirementsBuilding in Your Microwave Oven Cleaning the Microwave Oven Caring for your microwave ovenReplacing the Light Bulb How your microwave oven works Operating safety precautions Never Cook or Reheat a Whole EGGGeneral information Before calling for assistance WARRANTYMworn