Using your microwave oven
Microwave Oven Controls
There are three parts in the control section:
- Number Pads
Instructions for each control are covered on the following pages. Read them carefL my.
When you first plug in the oven, a tone sounds and the Display will show 88:88. If after you set the Clock (page 61,the Display again shows all 8’s; your electricity was off for a while. Reset the Clock.
Digital Display/Clock and
Indicator lights
When you are not using the microwave oven, this is an accurate Digital Clock. When you are using the microwave oven, it displays time set- tings, temperature
settings and Indicator Lights.
Command Pads
Touch Command Pads to tell the microwave oven what to do and in what order. A few examples:
- CLOCK SETtells the oven you are going to set the Clock.
- STARTtells the oven to start.
See page 6 for informa- tion on the tone you hear when touching any pad.
Each Command Pad, [except START,CANCEL and CLOCK SET)lights an Indicator Light on the Digital Display. The Indicator Light comes on when you touch the Command Pad.
While the oven is running, an Indicator Light (or lights] will be on to show what the oven is doing.
Number Pads
-a food setting.