Whirlpool MW8901XS, MW8900XS manual Cook

Page 25

.* -a m

7.Touch COOK POWER. (Option: Skip to Step 9 it you want to use HIGH power.)

8.Touch a Number Pad for the Cook Power you want.

9.Touch START.

The COOK POWER Indicator Light will come on and the Display will show “P-HI:’This shows the oven is pre-

programmed to cook at full (HIGH] power.

The Display will show what you touched. This example shows you touched Number Pad 7 for 70% of full power.

The AUTO STARTIndicator Light will stay on. All other Indicator Lights will go off. The Display will go back to showing the time of day.

When the time of day reaches the time you have set in AUTO START,the AUTO START Indicator Light will

go off, the COOK and Cook Power Indicator Lights will come on,

the cooking time will show on the Display, and the oven will start cooking.

The Display counts down the time to show how much time is left in

COOK

When the cooking time ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a reminder tone will sound every 60 seconds until the door is opened or CANCEL is touched. The Display will then show the time of day.

Note: If the oven light and fan come on when you touch START, the Start Time has not been set correctly.

Open and close door, reprogram AUTO START time, then touch START.

25

Image 25

Contents Microwave Oven Parts and features ContentsBefore you use your microwave oven Before you install your microwave ovenImportant Safety Instructions Digital Display/Clock Indicator lights Using your microwave ovenCommand Pads Microwave Oven ControlsSetting the Clock Audible SignalsChanging the Minute Timer Using the Minute TimerCancelling the Minute Timer Cooking in Your Microwave Oven Using Auto SensorCook Frozen Do this Ii!!l Auto Sensor operating hints Cooking at High Cook PowerChanging the Cooking Time In-use Reprogramming Cooking at Lower Cook PowersPage Defrosting Changing the Cook PowerStanding Time Changing or Adding Defrost Time About the Quick Defrost CycleCooking Automatically After Defrosting Page Cooking with the Temperature Probe Probe Temp Changing the Temperature SettingTemperature Probe Cooking Tips Hints for Using the Temperature ProbeRemoving and Cleaning the Temperature Probe DON’T‘Using Pause with Quick Defrost Using PauseAdding Pause to Cycle in Operation Using Pause with Auto SensorPause is Automatic between Cook and Probe Temp To Automatically Follow Another Cycle Using Keep WarmUsing Auto Start Cook Additional Information Other Operating HintsBi-Level Cooking Rack Cleaning the RackInserting the Rack Installing Your Microwave Oven Installation instructionsElectrical requirements Grounding InstructionsBuilding in Your Microwave Oven Caring for your microwave oven Cleaning the Microwave OvenReplacing the Light Bulb How your microwave oven works Never Cook or Reheat a Whole EGG Operating safety precautionsGeneral information Before calling for assistance WARRANTYMworn