Charcoal filter accessory:
Your microwave oven does not come equipped with a charcoal filter. if your microwave hood combination is being used to recirculate air, we recommend that you install the charcoal filter accessory. Replace- ment charcoal filters are available from your authorized Roper service company,
4.Slide a new charcoal filter into place. The filter should rest at the angle shown.
- -
1.Remove the vent cover mounting screws.
2.Tip the cover forward, then lift out to remove.
5.Slide the bottom of the vent cover into place. Push the top until it snaps into place. Replace the mounting screws.
After replacing filters:
l Plug in power cord or turn on power supply.
3.if you need to remove an existing charcoal filter, lift the back of the charcoal filter. Slide the filter straight out. If you are installing a filter for the first time go to Step 4.
38