Whirlpool 9753051 manual Caring for Your Cooktop

Page 30

CARING FOR YOUR RANGE

CARING FOR YOUR COOKTOP

Your cooktop is designed for ease of care. You can do most cleaning with items found around the home. Cleaning your cooktop whenever spills or soiling occur will help to keep it looking and operating like new.

NOTES:

To clean burners and burner caps:

Burner cap

•Before cleaning make sure all controls are off and the cooktop is cool.

•Do not obstruct the flow of combustion and ven- tilation air.

•If knobs are removed while cleaning, be careful not to spill liquids through holes in the control area.

•Be careful not to allow moisture to collect in control area. Moisture could cause ignitor switches to fail.

Surface burners

•The burner caps should be routinely removed and cleaned. Always clean burner caps after a spillover. Keeping the burner caps clean prevents improper ignition and an uneven flame.

•For proper flow of gas and ignition of the burner,

DO NOT ALLOW SPILLS, FOOD, CLEANING AGENTS, OR ANY OTHER MATERIAL TO ENTER THE GAS TUBE OPENING.

•Occasionally check the burner flames for proper size and shape as shown later in this section. A good flame is blue in color. If flames lift off ports, are yellow, or are noisy when turned off, you may need to clean the burners.

NOTE: To check oven burner flames for proper size and shape, see the Installation

Instructions also included with the range.

Ignitor

Gas tube opening (orifice)

1.Lift the burner cap straight up from the burner base.

2.Clean burner cap. (See “Cleaning chart” in previous section.)

3.If the gas tube opening or the orifice, located inside the opening, has become soiled or clogged, use a cotton swab or a soft cloth to clean the area.

4.If ports are clogged, clean with a straight pin.

Do not enlarge or distort port. Do not leave anything stuck in the ports.

5.After cleaning the gas tube opening and ports, replace the burner cap. To replace burner cap, make sure it sits level on the burner.

6.Check the burner after cleaning for proper lighting.

Adjusting the height of top burner flames

The LO burner flame should be a steady blue flame approximately 1⁄4 inch (6 mm) high. It can be adjusted using the adjustment screw in the center of the valve stem. The valve stem is located directly underneath the control knob.

To adjust the flame height follow the instruc- tions below:

1.Turn the control knob to “LO.”

2.Remove the control knob.

3.Hold the valve stem with a pair of pliers. The screw is located in the center of the valve stem. Use a small flat head screwdriver to turn the screw until the flame is the proper size.

4.Replace the control knob.

Adjustment screw

Valve stem

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Slide-In 9753051What to do if YOU Smell GAS ANTI-TIP Bracket On nextImportant Safety Instructions For self-cleaning rangesParts and Features Control PanelUsing the Surface Burners Using the control knobsBurner heat settings Home canning information Big differenceTo protect your range Rack placement for specific foods Positioning racks and pansUsing Aluminum Foil Bakeware ChoicesDisplay/clock Using the control lockElectronic Oven Control To lock or shut down the control panelSetting the Clock Using the Minute TimerSTARTING/CANCELING a Function When time is upTo choose between high and low volume tones TonesBAKE/ROAST Roasting meats and poultry Saving energyAdjusting Oven Temperature Control To display temperatures in C instead of F…Adjustment needed BroilVARI-BROIL To ensure adequate grease drainage, do notBroiling chart Broiling guidelinesTimed Cooking To start bake/roast now and stop automaticallyTimed Cooking Press the Delay button Oven Vent and Oven Door Vent Oven door ventRemoving the storage drawer Storage DrawerSWEEP-THRU Base Replacing the storage drawerUsing the SELF-CLEANING Cycle Before YOU StartSetting the Controls To start cleaning immediatelyTo stop the self-cleaning cycle at any time Temperature HOW the Cycle WorksTime In Hours Cleaning Chart Part Cleaning Method Special InstructionsOven cavity Routine cleaningOven door glass Oven racksTo adjust the flame height follow the instruc- tions below Caring for Your CooktopRemoving the Oven Door Removing the oven doorReplacing the oven door Oven Light Replacing standard oven lights located on back wallRange does not Work Surface BurnersPROBLEMCAUSE/SOLUTION Cooking ResultsDisplay Messages Index Topic10/98 EncastrŽe 9753051FQUE Faire Dans LE CAS D’UNE Odeur DE GAZ SƒCURITƒ DE LA CUISINIéRE LA Bride AntibasculementImportantes Instructions DE Sécurité Cuisinière autonettoyanteBouton de Commande Avant droit Tableau DE CommandeBouton de Commande Arrière GaucheRŽglage de la chaleur des bržleurs BrûleurConserves ˆ la maison Grande diffŽrenceCARACTƒRISTIQUES DES MATƒRIAUX DES Ustensiles DE Cuisson Utilisation DU Four Position des grilles et lchefritesUtilisation DE Papier Dõaluminium Choix Dõustensiles DE CuissonCommande ƒLECTRONIQUE DU Four Afficheur/horlogeRemarques RƒGLAGE DE Lõhorloge Utilisation DE LA MinuterieMettre l’horloge en marche Lorsque le temps est écoulé Appuyer sur le bouton Timer OFFUtilisation DE LA Minuterie Suite Interrompre la minuterieCuisson AU FOUR/RïTISSAGE Devant de la grille Arrière de la grilleChoisir le réglage BAKE/ROAST Cuisson AU FOUR/RïTISSAGE Suite Ƒconomie dÕŽnergieExemple pour température réglée à 191 oC 375oF Après la cuisson, éteindre le four Pour afficher les températures en C au lieu de F…Cuisson AU Gril TempŽrature nŽcessaireCuisson AU Gril Suite VARI-CUISSON AU GrilTemps Approximatif Utilisation DE LA CUISINIéRETableau de cuisson au gril Position Minutes Viande DE LA Grille CôtéCuisson COMMANDƒE PAR LA Minuterie Cuisson COMMANDƒE PAR LA Minuterie Suite Cuisson COMMANDƒE PAR Minuterie Suite Lorsque la cuisson/rôtissage est terminée… ƑVENT DU Four ET ƒVENT DE LA Porte DU Four Ƒvent de la porte du fourBase DE Balayage RŽinstallation du tiroir de remisageLE Tiroir DE Remisage Retrait du tiroir de remisageAvant LA Mise EN Marche Utilisation DU Programme DõautonettoyageRƒGLAGE DES Commandes LÕautonettoyageRƒGLAGE DES Commandes Suite Pour interrompre le programme dÕautonettoyage ˆ tout momentFonctionnement DU Programme Tableau DE Nettoyage Pièce Méthode DE Nettoyage Instructions SpécialesTableau DE Nettoyage Suite Agent DE Nettoyage UtilisationEntretien DE LA Table DE Cuisson Pour nettoyer les brûleurs et leurs couverclesRemettre le bouton de commande en place ENLéVEMENT DE LA Porte DU FourCommandes Lampe DU FourPour enlever la vitre de la console des Problème CAUSE/SOLUTION LA CUISINIéRE NE Fonctionne PASBRóLEURS DE Surface RƒSULTATS DE Cuisson Messages AFFICHƒSPage Page Sujet Brûleurs DE SurfaceWhirlpool Corporation Imprimé aux É-U

9753051 specifications

The Whirlpool 9753051 is a notable entry in the realm of kitchen appliances, particularly designed for those looking for efficiency and convenience in their cooking experiences. This appliance stands out due to its sophisticated design and blend of advanced features, making it a valuable addition to any modern kitchen.

One of the key features of the Whirlpool 9753051 is its spacious cooking capacity. The generous interior provides ample space for preparing meals for families or gatherings, accommodating multiple dishes simultaneously. This is particularly beneficial for users who frequently entertain guests or prepare large amounts of food.

The appliance utilizes innovative technology to enhance cooking performance. With its advanced convection cooking system, heat is distributed evenly, ensuring that food is cooked to perfection. This technology not only speeds up the cooking process but also helps in achieving consistent results, reducing the likelihood of undercooked or overcooked meals.

Another significant characteristic of the Whirlpool 9753051 is its intuitive control panel. Users can easily navigate through various cooking modes and settings, allowing for a seamless cooking experience. The user-friendly interface is designed to cater to both novice cooks and experienced chefs, making it accessible for all skill levels.

The built-in sensor cooking technology is another highlight of the Whirlpool 9753051. This feature detects moisture levels in food and automatically adjusts cooking times and temperatures accordingly. Such precision ensures that meals are cooked precisely as intended, providing an added layer of convenience for users who may be short on time.

Furthermore, the Whirlpool 9753051 is designed with energy efficiency in mind. With an Energy Star rating, it consumes less energy compared to conventional cooking appliances. This not only helps in reducing electricity bills but also reflects a commitment to environmentally friendly practices.

Additionally, the appliance is equipped with self-cleaning capabilities, making maintenance a breeze. Users can simply activate the self-clean feature, allowing the appliance to take care of the tough cleaning tasks, saving valuable time and effort.

In summary, the Whirlpool 9753051 is distinguished by its spacious cooking capacity, innovative cooking technologies, user-friendly controls, and energy-efficient design. These features combined with self-cleaning capabilities make it an ideal choice for individuals and families seeking a reliable and efficient cooking solution in their homes.
Top Page Image Contents