Cisco Systems OL-12397-13 manual Direct Outward Dialing, Do Not Disturb

Page 22

Chapter 2 SIP Subscribers

Cisco BTS 10200 Softswitch-Based Features

Direct Outward Dialing

With the Direct Outward Dialing (DOD) service, a station user can place external calls to the exchange network without attendant assistance by:

1.Dialing the DOD (public) access code (usually the digit 9)

2.Receiving a second dial tone

3.Dialing the external number (a number outside the customer group) Access to the DOD feature is subject to station restrictions.

Note For IP phones, the second dial tone is provided by the phone itself. However, the prefix code is presented to the BTS 10200 along with the DDD number in the INVITE message. Secondary dial-tone capability is dependent on the SIP device used.

For information about the operation of this feature, see the DOD for PBX section in the

Cisco BTS 10200 Softswitch Network and Subscriber Feature Descriptions guide.

Do Not Disturb

The Do Not Disturb (DND) feature enables a user to block incoming calls to the station on which the feature is activated. If no call forwarding features are activated, calls to the station are routed to busy treatment. This feature should be provisioned and activated on the BTS 10200 because of feature interaction with advanced features like executive override.

This is a single-stage dialing activation feature. The Alert-Info header plays the result of activation/deactivation—Success is a confirmation tone and failure is a failure message.

The reminder ring option (which is available with the DND feature on MGCP-based lines) cannot be used with SIP devices.

For features (such as DND) that can be fully provisioned on the BTS 10200 or on the phone, you can provision either one of the devices to enable the feature.

Caution Prior to provisioning your system, determine how you want to apply and configure features in your network to avoid conflicts between features provided by the BTS 10200 and features provided by the phones.

Additional information on this feature is provided at the following links.

 

Feature Behavior (Feature Description and

Provisioning Procedure

Handset Provisioning)

 

 

“Do Not Disturb (DND)” section in the

“Do Not Disturb (DND)” section in the

Cisco BTS 10200 Softswitch Provisioning Guide

Cisco BTS 10200 Softswitch Network and

 

Subscriber Feature Descriptions document

 

 

 

Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0

2-22

OL-12397-13

Page 21 Page 23
Image 22
Page 21 Page 23
Contents SIP Subscribers A P T E RProvisioning a SIP Subscriber SIP Phone InitializationSIP Registration and Security Enhanced SIP Registration DescriptionProvisioning Commands ExampleEnable or Disable Secure Fqdn for an Existing Subscriber Provision a New SIP SubscriberCisco BTS 10200 Challenges Registration OperationsRegistration Expires Received SIP Response Message Call ProcessingValidation SecurefqdnRules for Sending a SIP Invite Message from the BTS Events and AlarmsMeasurements Validation of ACK RequestSIP User Authentication AORSIP Subscriber Calls Provisioning Session Timers for SIP Subscribers SIP Timer Values for SIP SubscribersDiversion Indication for SIP Subscribers Acrdeact ACRAcract AcactCfbvd CFBCfbva CfbiCidss CwdiCidsd CidcwDND DrcwDrcwact DndactOcbi OcbaOcbd OsfgCPT Cisco BTS 10200 Softswitch-Based FeaturesSummary CidsCall Forwarding Call Forwarding Activation and DeactivationCalling Name and Number Delivery Detailed Provisioning Procedure and Feature DescriptionCall Forwarding to an E.164 Number or an Extension Number Caller ID Delivery Suppression Customer Access TreatmentDirect Inward Dialing Direct Outward Dialing Do Not DisturbCentrex Dialing Plan Extension Dialing Operator Services 0-, 0+, 01+, and 00 CallsVertical Service Code Features User-Level PrivacySupported VSC-Enabled Features for SIP Endpoints Planning VSCs In Networks with SIP SubscribersVM Deposit Voice MailVM Actions MWI NotificationRetrieving VM VM Implementation for Centrex SubscribersCalling Back a Message Depositor VM Within a Single Centrex Group Add the SIP trunk groupProvisioning Voice Mail Across Multiple Centrex Groups Jointly Provided Features Text-GUI FeaturesSupported Handsets Supported FeaturesAccessing Features SIP HandsetCall Transfer Blind and Attended with Refer SIP Software ClientsDistinctive Ringing for Centrex did Calls Phone-Based FeaturesDistinctive Ringing CwcidSIP Subscribers Phone-Based Features OL-12397-13

OL-12397-13 specifications

Cisco Systems OL-12397-13 refers to a specific training course or certification related to Cisco's networking technologies and solutions. While precise details about OL-12397-13 may vary, it typically encompasses various features, technologies, and characteristics central to Cisco's offerings in networking and cybersecurity.

One main feature of the course is its comprehensive curriculum designed to provide learners with in-depth knowledge of Cisco’s networking architecture and best practices. The course often covers topics such as routing and switching, network security, wireless networking, and automation, enabling participants to understand the complex interactions within a network environment.

Another significant inclusion in the OL-12397-13 curriculum is an emphasis on emerging technologies. This may include training on software-defined networking (SDN), Internet of Things (IoT) solutions, and cloud-based networking. By integrating these modern frameworks, participants can grasp how to manage and optimize their network infrastructures for current and future demands.

A key characteristic of Cisco certification courses is the hands-on training component. Classes may involve lab sessions where students can apply theoretical knowledge practically by configuring devices, troubleshooting network issues, and implementing security protocols. This experiential learning ensures that learners are prepared to face real-world networking challenges.

The course also aims to instill best practices in network management and monitoring. Concepts such as network design, implementation strategies, and the use of network management tools are pivotal to ensuring efficient and secure operations within an organization.

Moreover, the emphasis on security throughout the OL-12397-13 course reflects the growing need for robust cybersecurity measures in networking. Participants are taught how to identify vulnerabilities, implement security measures, and respond to potential threats, which is crucial in today’s digital landscape.

Networking professionals pursuing Cisco certifications find OL-12397-13 to be instrumental in developing their skill sets, enhancing their career prospects, and enabling them to contribute effectively to their organizations. Overall, OL-12397-13 serves as a gateway for individuals looking to solidify their understanding of Cisco's technologies while preparing for future advancements in the field of networking. With a focus on both foundational knowledge and cutting-edge trends, it positions learners to excel in a rapidly evolving tech landscape.
Top Page Image Contents