Cisco Systems OL-12397-13 manual Centrex Dialing Plan Extension Dialing, User-Level Privacy

Page 23

Chapter 2 SIP Subscribers

Cisco BTS 10200 Softswitch-Based Features

E.164 and Centrex Dialing Plan (Extension Dialing)

The system supports E.164 and Centrex Dialing Plan (extension dialing) addressing from SIP subscribers served by the local BTS 10200.

The SIP phone’s dial plan must be configured so that it considers the number of digits in the Centrex group. Centrex dialing can be provisioned within a range of 1 through 7 digits. Each Centrex group should have its own separate dial plan.

Note The CDP feature should be assigned to every Centrex category user.

Example 2-1 A SIP URL with E.164 Addressing

sip:4695551234@rcdn.cisco.com;user=phoneA sip:50603@rcdn.cisco.com;user=phone

Additional information on this feature is provided at the following links.

 

 

Feature Behavior (Feature Description and

Provisioning Procedure

Handset Provisioning)

 

 

“Provisioning a Centrex Group” section in the

“Numbering Plans and Dialing Procedures”

Cisco BTS 10200

Softswitch Provisioning Guide

section in the Cisco BTS 10200 Softswitch

 

 

Network and Subscriber Feature Descriptions

Cisco BTS 10200

Softswitch Dial Plan document

document

“Features for Centrex Subscribers Only” section

 

 

in the Cisco BTS 10200 Softswitch Network and

 

 

Subscriber Feature Descriptions document

 

 

 

Operator Services (0-, 0+, 01+, and 00 Calls)

There is no Cisco BTS 10200 Softswitch subscriber-specific provisioning involved for Operator Services.

Additional information on this feature is provided in the “Operator Services” section in the

Cisco BTS 10200 Softswitch Network and Subscriber Feature Descriptions document

User-Level Privacy

User-level privacy is provisioned in the Subscriber table.

Setting the privacy parameter to user directs the system to apply the user-provided privacy information. This setting (privacy=user) applies only to SIP endpoints that are capable of including privacy information.

Vertical Service Code Features

This section explains how to plan vertical service codes (VSCs) in a network with SIP subscribers, and lists the VSC-enabled features.

 

 

Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0

 

 

 

 

 

 

OL-12397-13

 

 

2-23

 

 

 

 

 

Image 23
Contents A P T E R SIP SubscribersSIP Registration and Security SIP Phone InitializationProvisioning a SIP Subscriber Description Enhanced SIP RegistrationExample Provisioning CommandsProvision a New SIP Subscriber Enable or Disable Secure Fqdn for an Existing SubscriberRegistration Expires OperationsCisco BTS 10200 Challenges Registration Securefqdn Call ProcessingValidation Received SIP Response MessageValidation of ACK Request Events and AlarmsMeasurements Rules for Sending a SIP Invite Message from the BTSAOR SIP User AuthenticationSIP Subscriber Calls SIP Timer Values for SIP Subscribers Provisioning Session Timers for SIP SubscribersDiversion Indication for SIP Subscribers Acact ACRAcract AcrdeactCfbi CFBCfbva CfbvdCidcw CwdiCidsd CidssDndact DrcwDrcwact DNDOsfg OcbaOcbd OcbiCids Cisco BTS 10200 Softswitch-Based FeaturesSummary CPTCall Forwarding Activation and Deactivation Call ForwardingCall Forwarding to an E.164 Number or an Extension Number Detailed Provisioning Procedure and Feature DescriptionCalling Name and Number Delivery Direct Inward Dialing Customer Access TreatmentCaller ID Delivery Suppression Do Not Disturb Direct Outward DialingUser-Level Privacy Operator Services 0-, 0+, 01+, and 00 CallsVertical Service Code Features Centrex Dialing Plan Extension DialingPlanning VSCs In Networks with SIP Subscribers Supported VSC-Enabled Features for SIP EndpointsMWI Notification Voice MailVM Actions VM DepositCalling Back a Message Depositor VM Implementation for Centrex SubscribersRetrieving VM Add the SIP trunk group VM Within a Single Centrex GroupProvisioning Voice Mail Across Multiple Centrex Groups Text-GUI Features Jointly Provided FeaturesSIP Handset Supported FeaturesAccessing Features Supported HandsetsSIP Software Clients Call Transfer Blind and Attended with ReferCwcid Phone-Based FeaturesDistinctive Ringing Distinctive Ringing for Centrex did CallsSIP Subscribers Phone-Based Features OL-12397-13

OL-12397-13 specifications

Cisco Systems OL-12397-13 refers to a specific training course or certification related to Cisco's networking technologies and solutions. While precise details about OL-12397-13 may vary, it typically encompasses various features, technologies, and characteristics central to Cisco's offerings in networking and cybersecurity.

One main feature of the course is its comprehensive curriculum designed to provide learners with in-depth knowledge of Cisco’s networking architecture and best practices. The course often covers topics such as routing and switching, network security, wireless networking, and automation, enabling participants to understand the complex interactions within a network environment.

Another significant inclusion in the OL-12397-13 curriculum is an emphasis on emerging technologies. This may include training on software-defined networking (SDN), Internet of Things (IoT) solutions, and cloud-based networking. By integrating these modern frameworks, participants can grasp how to manage and optimize their network infrastructures for current and future demands.

A key characteristic of Cisco certification courses is the hands-on training component. Classes may involve lab sessions where students can apply theoretical knowledge practically by configuring devices, troubleshooting network issues, and implementing security protocols. This experiential learning ensures that learners are prepared to face real-world networking challenges.

The course also aims to instill best practices in network management and monitoring. Concepts such as network design, implementation strategies, and the use of network management tools are pivotal to ensuring efficient and secure operations within an organization.

Moreover, the emphasis on security throughout the OL-12397-13 course reflects the growing need for robust cybersecurity measures in networking. Participants are taught how to identify vulnerabilities, implement security measures, and respond to potential threats, which is crucial in today’s digital landscape.

Networking professionals pursuing Cisco certifications find OL-12397-13 to be instrumental in developing their skill sets, enhancing their career prospects, and enabling them to contribute effectively to their organizations. Overall, OL-12397-13 serves as a gateway for individuals looking to solidify their understanding of Cisco's technologies while preparing for future advancements in the field of networking. With a focus on both foundational knowledge and cutting-edge trends, it positions learners to excel in a rapidly evolving tech landscape.