Cisco Systems OL-12397-13 manual Provision a New SIP Subscriber

Page 5

Chapter 2 SIP Subscribers

SIP Registration and Security

The SECURE_FQDN in the AOR2SUB table is stored both in the ORACLE database and the shared memory.

AOR2SUB records cannot be added or deleted directly. To add AOR2SUB records, you must specify specify the AOR ID on a subscriber record.

Provision a New SIP Subscriber

Step 1 To provision a new SIP subscriber with the secure FQDN feature, enter the following command.

Note This command automatically adds a corresponding entry in the AOR2SUB table.

add subscriber id=sub1; sub-profile-id=subpf1; category=individual; dn1=241-555-1018; term-type=SIP; aor-id=<aor-id of SIP adapter port for sub1>; secure-fqdn=<secure-fqdn of the SIP adapter>;

Step 2 (Optional) To provision an additional subscriber on the same SIP adapter, enter the following command:

add subscriber id=sub2; sub-profile-id=subpf1; category=individual; dn1=241-555-1022; term-type=SIP; aor-id=<aor-id of SIP adapter port for sub2>; secure-fqdn=<secure-fqdn of the SIP adapter>;

Note If there are multiple subscribers on a single SIP adapter (such as an ATA), these subscribers might share the same IP address. Therefore, you can provision all of these subscriber records with a single secure-fqdn, and in the DNS, this FQDN can point to the applicable IP address. The id, dn1, and aor-id tokens must have unique values for each subscriber.

Enable or Disable Secure FQDN for an Existing Subscriber

To enable or disable the secure FQDN feature for a successfully registered subscriber, enter the following commands:

Step 1 Take the AOR out of service (OOS). This command removes all registered contact.

change aor2sub aor-id=241-555-1018@sia-SYS41CA146.ipclab.cisco.com; status=oos;

Step 2 To enable the secure FQDN feature for an existing subscriber, enter the following command:

change subscriber id=sub1; secure-fqdn=ata-SYS41CA146.ipclab.cisco.com

To disable the secure FQDN feature for an existing subscriber, enter

change subscriber id=sub1; secure-fqdn=null

Note If secure-fqdn is not provisioned for the subscriber, the system does not provide the secure FQDN feature to that subscriber. If secure-fqdn has previously been provisioned for the subscriber, setting secure-fqdn to null disables the feature.

Step 3 To bring the AOR back in service (INS), enter the following command:

Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0

 

OL-12397-13

2-5

 

 

 

Image 5
Contents A P T E R SIP SubscribersSIP Registration and Security SIP Phone InitializationProvisioning a SIP Subscriber Description Enhanced SIP RegistrationExample Provisioning CommandsProvision a New SIP Subscriber Enable or Disable Secure Fqdn for an Existing SubscriberRegistration Expires OperationsCisco BTS 10200 Challenges Registration Validation Call ProcessingReceived SIP Response Message SecurefqdnMeasurements Events and AlarmsRules for Sending a SIP Invite Message from the BTS Validation of ACK RequestAOR SIP User AuthenticationSIP Subscriber Calls SIP Timer Values for SIP Subscribers Provisioning Session Timers for SIP SubscribersDiversion Indication for SIP Subscribers Acract ACRAcrdeact AcactCfbva CFBCfbvd CfbiCidsd CwdiCidss CidcwDrcwact DrcwDND DndactOcbd OcbaOcbi OsfgSummary Cisco BTS 10200 Softswitch-Based FeaturesCPT CidsCall Forwarding Activation and Deactivation Call ForwardingCall Forwarding to an E.164 Number or an Extension Number Detailed Provisioning Procedure and Feature DescriptionCalling Name and Number Delivery Direct Inward Dialing Customer Access TreatmentCaller ID Delivery Suppression Do Not Disturb Direct Outward DialingVertical Service Code Features Operator Services 0-, 0+, 01+, and 00 CallsCentrex Dialing Plan Extension Dialing User-Level PrivacyPlanning VSCs In Networks with SIP Subscribers Supported VSC-Enabled Features for SIP EndpointsVM Actions Voice MailVM Deposit MWI NotificationCalling Back a Message Depositor VM Implementation for Centrex SubscribersRetrieving VM Add the SIP trunk group VM Within a Single Centrex GroupProvisioning Voice Mail Across Multiple Centrex Groups Text-GUI Features Jointly Provided FeaturesAccessing Features Supported FeaturesSupported Handsets SIP HandsetSIP Software Clients Call Transfer Blind and Attended with ReferDistinctive Ringing Phone-Based FeaturesDistinctive Ringing for Centrex did Calls CwcidSIP Subscribers Phone-Based Features OL-12397-13

OL-12397-13 specifications

Cisco Systems OL-12397-13 refers to a specific training course or certification related to Cisco's networking technologies and solutions. While precise details about OL-12397-13 may vary, it typically encompasses various features, technologies, and characteristics central to Cisco's offerings in networking and cybersecurity.

One main feature of the course is its comprehensive curriculum designed to provide learners with in-depth knowledge of Cisco’s networking architecture and best practices. The course often covers topics such as routing and switching, network security, wireless networking, and automation, enabling participants to understand the complex interactions within a network environment.

Another significant inclusion in the OL-12397-13 curriculum is an emphasis on emerging technologies. This may include training on software-defined networking (SDN), Internet of Things (IoT) solutions, and cloud-based networking. By integrating these modern frameworks, participants can grasp how to manage and optimize their network infrastructures for current and future demands.

A key characteristic of Cisco certification courses is the hands-on training component. Classes may involve lab sessions where students can apply theoretical knowledge practically by configuring devices, troubleshooting network issues, and implementing security protocols. This experiential learning ensures that learners are prepared to face real-world networking challenges.

The course also aims to instill best practices in network management and monitoring. Concepts such as network design, implementation strategies, and the use of network management tools are pivotal to ensuring efficient and secure operations within an organization.

Moreover, the emphasis on security throughout the OL-12397-13 course reflects the growing need for robust cybersecurity measures in networking. Participants are taught how to identify vulnerabilities, implement security measures, and respond to potential threats, which is crucial in today’s digital landscape.

Networking professionals pursuing Cisco certifications find OL-12397-13 to be instrumental in developing their skill sets, enhancing their career prospects, and enabling them to contribute effectively to their organizations. Overall, OL-12397-13 serves as a gateway for individuals looking to solidify their understanding of Cisco's technologies while preparing for future advancements in the field of networking. With a focus on both foundational knowledge and cutting-edge trends, it positions learners to excel in a rapidly evolving tech landscape.