Cisco Systems OL-12397-13 manual Voice Mail, VM Actions, VM Deposit, MWI Notification

Page 25

Chapter 2 SIP Subscribers

Cisco BTS 10200 Softswitch-Based Features

•Call forwarding on no answer variable activation (CFNAVA), call forwarding on no answer variable deactivation (CFNAVD), call forwarding on no answer interrogation (CFNAI)

•Call forwarding on busy variable activation (CFBVA), call forwarding on busy variable deactivation (CFBVD), call forwarding on busy variable interrogation (CFBI)

•RACF Pin Change

Voice Mail

The voice-mail (VM) feature on the BTS 10200 allows subscribers to retrieve waiting voice messages from a VM server. The BTS 10200 receives a message-waiting indication (MWI) from the VM server and forwards the MWI to the subscriber’s handset. The subscriber can then retrieve messages from the server. The VM feature is available to individual subscribers and Centrex subscribers.

SIP trunks interconnecting the BTS 10200 to an external VM server must be provisioned as SIP VM trunks. To do that, you set the VM flag (voice-mail-trunk-grp) for these trunks in the softsw-tg-profile table. (See the “SIP Trunk to Voice-Mail Server” section on page 3-46.)

Note For a description of the basic VM feature, see the “Voice Mail and Voice Mail Always” section in the Cisco BTS 10200 Softswitch Network and Subscriber Feature Descriptions document. For general VM provisioning details, see the “Provisioning Voice Mail” section in the Cisco BTS 10200 Softswitch Provisioning Guide.

VM Actions

The following voice mail-related actions are supported in the BTS 10200:

•VM Deposit

•MWI Notification

•Retrieving VM

•Calling Back a Message Depositor

VM Deposit

There are two methods for depositing voice mail. In the first, the subscriber dials the pilot number for the VM server, and the call terminates on the voice-mail trunk. The VM system then collects the message for a target mailbox, using Interactive Voice Response (IVR) prompts to guide the subscriber.

This method of depositing voice mail does not use any special BTS 10200 capabilities; it just requires that the VM SIP trunk is provisioned and the pilot number is added to the dial plan of the subscriber calling the VM system.

In the second (more common) method, the subscriber activates a call forwarding feature on the

BTS 10200, such as CFNA, CFU, or CFB, and specifies the forwarding number as the pilot number of the VM server.

MWI Notification

When a SIP phone registers with the BTS 10200, the BTS 10200 sends an unsolicited SIP NOTIFY message to convey the MWI status to the phone. This occurs on every registration, including refreshes.

 

 

Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0

 

 

 

 

 

 

OL-12397-13

 

 

2-25

 

 

 

 

 

Page 24 Page 26
Image 25
Page 24 Page 26
Contents A P T E R SIP SubscribersProvisioning a SIP Subscriber SIP Phone InitializationSIP Registration and Security Description Enhanced SIP RegistrationExample Provisioning CommandsProvision a New SIP Subscriber Enable or Disable Secure Fqdn for an Existing SubscriberCisco BTS 10200 Challenges Registration OperationsRegistration Expires Validation Call ProcessingReceived SIP Response Message SecurefqdnMeasurements Events and AlarmsRules for Sending a SIP Invite Message from the BTS Validation of ACK RequestAOR SIP User AuthenticationSIP Subscriber Calls SIP Timer Values for SIP Subscribers Provisioning Session Timers for SIP SubscribersDiversion Indication for SIP Subscribers Acract ACRAcrdeact AcactCfbva CFBCfbvd CfbiCidsd CwdiCidss CidcwDrcwact DrcwDND DndactOcbd OcbaOcbi OsfgSummary Cisco BTS 10200 Softswitch-Based FeaturesCPT CidsCall Forwarding Activation and Deactivation Call ForwardingCalling Name and Number Delivery Detailed Provisioning Procedure and Feature DescriptionCall Forwarding to an E.164 Number or an Extension Number Caller ID Delivery Suppression Customer Access TreatmentDirect Inward Dialing Do Not Disturb Direct Outward DialingVertical Service Code Features Operator Services 0-, 0+, 01+, and 00 CallsCentrex Dialing Plan Extension Dialing User-Level PrivacyPlanning VSCs In Networks with SIP Subscribers Supported VSC-Enabled Features for SIP EndpointsVM Actions Voice MailVM Deposit MWI NotificationRetrieving VM VM Implementation for Centrex SubscribersCalling Back a Message Depositor Add the SIP trunk group VM Within a Single Centrex GroupProvisioning Voice Mail Across Multiple Centrex Groups Text-GUI Features Jointly Provided FeaturesAccessing Features Supported FeaturesSupported Handsets SIP HandsetSIP Software Clients Call Transfer Blind and Attended with ReferDistinctive Ringing Phone-Based FeaturesDistinctive Ringing for Centrex did Calls CwcidSIP Subscribers Phone-Based Features OL-12397-13

OL-12397-13 specifications

Cisco Systems OL-12397-13 refers to a specific training course or certification related to Cisco's networking technologies and solutions. While precise details about OL-12397-13 may vary, it typically encompasses various features, technologies, and characteristics central to Cisco's offerings in networking and cybersecurity.

One main feature of the course is its comprehensive curriculum designed to provide learners with in-depth knowledge of Cisco’s networking architecture and best practices. The course often covers topics such as routing and switching, network security, wireless networking, and automation, enabling participants to understand the complex interactions within a network environment.

Another significant inclusion in the OL-12397-13 curriculum is an emphasis on emerging technologies. This may include training on software-defined networking (SDN), Internet of Things (IoT) solutions, and cloud-based networking. By integrating these modern frameworks, participants can grasp how to manage and optimize their network infrastructures for current and future demands.

A key characteristic of Cisco certification courses is the hands-on training component. Classes may involve lab sessions where students can apply theoretical knowledge practically by configuring devices, troubleshooting network issues, and implementing security protocols. This experiential learning ensures that learners are prepared to face real-world networking challenges.

The course also aims to instill best practices in network management and monitoring. Concepts such as network design, implementation strategies, and the use of network management tools are pivotal to ensuring efficient and secure operations within an organization.

Moreover, the emphasis on security throughout the OL-12397-13 course reflects the growing need for robust cybersecurity measures in networking. Participants are taught how to identify vulnerabilities, implement security measures, and respond to potential threats, which is crucial in today’s digital landscape.

Networking professionals pursuing Cisco certifications find OL-12397-13 to be instrumental in developing their skill sets, enhancing their career prospects, and enabling them to contribute effectively to their organizations. Overall, OL-12397-13 serves as a gateway for individuals looking to solidify their understanding of Cisco's technologies while preparing for future advancements in the field of networking. With a focus on both foundational knowledge and cutting-edge trends, it positions learners to excel in a rapidly evolving tech landscape.
Top Page Image Contents