Cisco Systems OL-12397-13 manual VM Within a Single Centrex Group, Add the SIP trunk group

Page 27

Chapter 2 SIP Subscribers

Cisco BTS 10200 Softswitch-Based Features

Note For general VM provisioning details, see “Provisioning Voice Mail” in the Cisco BTS 10200 Softswitch Provisioning Guide.

VM Within a Single Centrex Group

The following examples show commands for provisioning Centrex VM. Before you perform the following steps, you must already have a Centrex group provisioned on your system. See the procedure in the “Provisioning a Centrex Group” section of the Cisco BTS 10200 Softswitch Provisioning Guide.

Step 1 Add the destination ID for the voice-mail main subscriber.

add destination dest-id=tb16-local; call-type=LOCAL; route-type=SUB;

Step 2 Add a dial plan profile and dial plan for a SIP trunk to the VM server.

add dial-plan-profile id=tb16;

add dial-plan id=tb16; digit-string=469-555; dest-id=tb16-local; min-digits=10; max-digits=10

Step 3 Add the softswitch trunk group profile for voice mail.

add softsw-tg-profile id=VM_Profile; protocol-type=SIP; voice_mail_trunk_grp=Y;

Note As an option, you can provision the diversion-header-supp token in the softsw-tg-profile table to Y. This instructs the VM server to select the target inbox based on the original called number in the Diversion header of the SIP message.

Step 4 Add the SIP trunk group.

Note This SIP trunk group serves several purposes. It is used (1) by the subscriber to access the VM server, (2) by the BTS 10200 to forward incoming calls to the VM server, and (3) by the VM server to notify the BTS 10200 that a message is waiting for the subscriber.

add trunk-grp id=80032; softsw-tsap-addr=vm.domainname.com:5060; call-agent-id=CA146; tg-type=softsw; tg-profile-id=VM_Profile; dial-plan-id=tb16

Step 5 Add a subscriber to the Centrex group to serve as the VM main subscriber.

add subscriber id=vmctxg1; CATEGORY=ctxg; BILLING-DN=469-555-4444; DN1=469-555-4444; SUB-PROFILE-ID=Centrex_sp2; TERM-TYPE=TG; ctxg_id=ctxgsip1; tgn_id=80032;

Step 6 Link the VM main subscriber with the trunk group.

change trunk-grp; id=80032; main_sub_id=vmctxg1;

Step 7 Map the voice-mail Centrex extension to the VM main subscriber.

add ext2subscriber CTXG-ID=ctxgsip1; EXT=54444; CAT-CODE=1; SUB-ID=vmctxg1;

 

 

Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0

 

 

 

 

 

 

OL-12397-13

 

 

2-27

 

 

 

 

 

Image 27
Contents A P T E R SIP SubscribersSIP Phone Initialization Provisioning a SIP SubscriberSIP Registration and Security Description Enhanced SIP RegistrationExample Provisioning CommandsProvision a New SIP Subscriber Enable or Disable Secure Fqdn for an Existing SubscriberOperations Cisco BTS 10200 Challenges RegistrationRegistration Expires Securefqdn Call ProcessingValidation Received SIP Response MessageValidation of ACK Request Events and AlarmsMeasurements Rules for Sending a SIP Invite Message from the BTSAOR SIP User AuthenticationSIP Subscriber Calls SIP Timer Values for SIP Subscribers Provisioning Session Timers for SIP SubscribersDiversion Indication for SIP Subscribers Acact ACRAcract AcrdeactCfbi CFBCfbva CfbvdCidcw CwdiCidsd CidssDndact DrcwDrcwact DNDOsfg OcbaOcbd OcbiCids Cisco BTS 10200 Softswitch-Based FeaturesSummary CPTCall Forwarding Activation and Deactivation Call ForwardingDetailed Provisioning Procedure and Feature Description Calling Name and Number DeliveryCall Forwarding to an E.164 Number or an Extension Number Customer Access Treatment Caller ID Delivery SuppressionDirect Inward Dialing Do Not Disturb Direct Outward DialingUser-Level Privacy Operator Services 0-, 0+, 01+, and 00 CallsVertical Service Code Features Centrex Dialing Plan Extension DialingPlanning VSCs In Networks with SIP Subscribers Supported VSC-Enabled Features for SIP EndpointsMWI Notification Voice MailVM Actions VM DepositVM Implementation for Centrex Subscribers Retrieving VMCalling Back a Message Depositor Add the SIP trunk group VM Within a Single Centrex GroupProvisioning Voice Mail Across Multiple Centrex Groups Text-GUI Features Jointly Provided FeaturesSIP Handset Supported FeaturesAccessing Features Supported HandsetsSIP Software Clients Call Transfer Blind and Attended with ReferCwcid Phone-Based FeaturesDistinctive Ringing Distinctive Ringing for Centrex did CallsSIP Subscribers Phone-Based Features OL-12397-13

OL-12397-13 specifications

Cisco Systems OL-12397-13 refers to a specific training course or certification related to Cisco's networking technologies and solutions. While precise details about OL-12397-13 may vary, it typically encompasses various features, technologies, and characteristics central to Cisco's offerings in networking and cybersecurity.

One main feature of the course is its comprehensive curriculum designed to provide learners with in-depth knowledge of Cisco’s networking architecture and best practices. The course often covers topics such as routing and switching, network security, wireless networking, and automation, enabling participants to understand the complex interactions within a network environment.

Another significant inclusion in the OL-12397-13 curriculum is an emphasis on emerging technologies. This may include training on software-defined networking (SDN), Internet of Things (IoT) solutions, and cloud-based networking. By integrating these modern frameworks, participants can grasp how to manage and optimize their network infrastructures for current and future demands.

A key characteristic of Cisco certification courses is the hands-on training component. Classes may involve lab sessions where students can apply theoretical knowledge practically by configuring devices, troubleshooting network issues, and implementing security protocols. This experiential learning ensures that learners are prepared to face real-world networking challenges.

The course also aims to instill best practices in network management and monitoring. Concepts such as network design, implementation strategies, and the use of network management tools are pivotal to ensuring efficient and secure operations within an organization.

Moreover, the emphasis on security throughout the OL-12397-13 course reflects the growing need for robust cybersecurity measures in networking. Participants are taught how to identify vulnerabilities, implement security measures, and respond to potential threats, which is crucial in today’s digital landscape.

Networking professionals pursuing Cisco certifications find OL-12397-13 to be instrumental in developing their skill sets, enhancing their career prospects, and enabling them to contribute effectively to their organizations. Overall, OL-12397-13 serves as a gateway for individuals looking to solidify their understanding of Cisco's technologies while preparing for future advancements in the field of networking. With a focus on both foundational knowledge and cutting-edge trends, it positions learners to excel in a rapidly evolving tech landscape.