Broan RMIP33, RMIP45 Install the Blower Interior Blower CONT’D, Dual blower P8

Page 11

18. INSTALL THE BLOWER (INTERIOR BLOWER) (CONT’D)

Install (4) no. 8 x 3/8’’ screws into the location as shown in the pictures below (single blower or dual blower). Do not tight- en screws down fully, leave a 1/8” gap. Hang blower unit onto blower plate (screws through the large part of the key- hole). Slide the blower to its position (screws in the small part of the keyhole). Tighten the (4) screws.

HD0044

Single blower (P5)

HD0045

Dual blower (P8)

Secure the blower by installing 2 more no. 8 x 3/8’’ screws for the P5 blower and 4 more no. 8 x 3/8’’ screws for P8 into the locations shown in the pictures below (single blower or dual blower). Reinstall impeller(s) and cover.

HD0080

HD0081

Single blower (P5)

FOR DUAL BLOWER UNIT, MAKE SURE THE IMPELLERS ARE CORRECTLY INSTALLED, THE INSERT WILL NOT WORK PROPERLY IF REVERSED. Both impellers are different in the dual blower, one rotates clockwise and the other counterclockwise. Each wheel and motor have an arrow and a number on them, you have to match them correctly (see drawing beside).

Dual blower (P8)

FRONT

1

2

HD0023

! WARNING

Never plug the 2-prong blower cord to the 3-prong power supply cord.

Plug the power supply to the 3-prong male connector (A) and the blower unit into the 2-prong female receptacle (B) inside the insert.

A

B

HE0022

- 11 -

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Models RMIP33 and RMIP45 Evacuate and Call the Fire Department Flames do not GO OUT ImmediatelyRmipwc RMIP33 and RMIP45 Insert SystemIN-LINE and Exterior Blowers Prepare the Installation Select Blower Option and Install DuctworkRMIP33 Install Backsplash OptionalCustom Hood Preparation Suggested Custom Hood Internal FrameworkCUT the Hole in Custom Hood Base Install Custom Hood Liner OptionalInstall the Rmipwc Remote Control Optional Install Blower Interior or Exterior BlowerRemove the KNOCK-OUT Opening Interior Blower Install the Deviator Interior BlowerInstall the Adapter Interior Blower Install the Transition Interior Blower Connect Wiring ALL BlowersInstall the ROUGH-IN Plate ALL Blowers Ducting Connection ALL Blowers Install the InsertInstall the Blower Interior Blower Dual blower P8 Install the Blower Interior Blower CONT’DKIT no Insert Model RBFIP33 RMIP33 RBFIP45 RMIP45 Install FiltersLight Bulbs USE and CareOperation USE and Care CONT’DWarranty 16 15 14 13 Dual BLOWER/ROUGH-IN
Related manuals
Manual 48 pages 62.6 Kb Manual 48 pages 30.63 Kb
Top Page Image Contents