Broan E54000 manual Prepare Support Frame, FOOT Ceilings, Foot Ceilings

PREPARE SUPPORT FRAME

8 AND 9-FOOT CEILINGS

1.Measure the ceiling height and determine distance between the cook top and bottom of hood.

2.Remove (4) screws and washers in the height adjustment slots. Figure 8.

3.Per the chart, adjust overall lenght of the support frame. Figure 8.

4.Reinstall (4) screws and washers in the height adjustment slots. Figure 8.

HEIGHT

ADJUSTMENT

SLOTS

FRONT

FIG. 8

CEILING			HOOD DISTANCE ABOVE 36” HIGH COOK TOP (See note a)
	DUCT METHOD	24”		25”	26”	27”	28”	29”	30”
HEIGHT				LENGHT OF SUPPORT FRAME, DIMENSION “A”
8 FOOT	DUCTED	22”		21”	20”
CEILING	NON DUCTED	22”		21”	20”	19”	18”
9 FOOT	DUCTED &				32”	31”	30”	29”	28”
CEILING	NON DUCTED
10 FOOT	DUCTED &	46”		45”	44”	43”	42”	41”	40”
CEILING	NON DUCTED
(see note
b)

Notes:

a.Minimum hood distance above cook top must not be less than 24”.

A maximun of 30” above cook top is highly recommended for best capture of cooking impurities.

Distances over 30” are at the installer’s and user’s discretion; providing that ceiling height and flue length permit.

b.Requires optional 10-foot flue extension.

10-FOOT CEILINGS

Note: The following materials must be purchased separately for 10-foot ceiling installations.

•

•

Flue extension model FX54SS for ducted installations

Flue extension model FXN54SS for non-ducted installations

5.Discard the upper support frame half supplied with the range hood. Replace with the longer upper support frame supplied with the flue extension.

6.Follow steps 1 through 4 shown above.

- 9 -