Dacor ER30D Setting the Time, 24/12 Hour Clock Military Time, Setting the Temperature Scale

Page 11

Setting Up Your Range

CONTROL PANEL SETTINGS

Setting the Time

IMPORTANT:

•The clock cannot be set during delay timed cooking or if one or both timers are in use.

•After a power failure, the time on the display may flash, indicating that the time may not be correct.

To set the time:

1.Press the CLOCK key. “TIME” will flash on the display.

2.Enter the current time and press START. For example: For 12:08 Press 1-2-0-8 on the keypad, then START.

IMPORTANT: After pressing the clock key, you must enter the time and press START soon afterward. If you wait longer than six seconds between pressing keys, the display will go back to the original setting.

Clock Key

24/12 Hour Clock (Military Time)

The range is set to 12-hour (non-military) time at the factory. 24- hour time is also known as military time. 1:36 PM = 13:36 military time.

If you want to switch the clock to 24 hour time or switch from military back to regular time:

1.Press and hold the clock key for six seconds. The display will indicate the mode the clock is currently set to, 12 HR or 24 HR.

2.Press the SELF-CLEANkey within six seconds to change the clock mode. To leave the setting as is, do not touch any keys.

3.Wait six seconds. The control panel will go back to the regular clock display, set to the new time standard. If you have set the clock to 24 hour time, the keypad will allow you to enter military time when setting the clock.

Setting the Temperature Scale

The control panel allows you to select the temperature scale (Fahrenheit or Celsius) it uses to display the cooking temperature. The oven is preset at the factory to Fahrenheit.

To change the temperature scale:

1.Press and hold the BROIL key for six seconds.

2.The display will indicate the temperature scale the control panel is currently set to, “F” or “C”.

3.Press the SELF-CLEANkey within six seconds to change the temperature scale. To leave the setting as is, do not touch any keys.

4.Wait six seconds. The control panel will go back to the regular clock display, set to the new temperature scale.

Control Panel Position

The control panel can be swiveled to a 50° angle for easier viewing and use.

To pivot the control panel:

1.Push in on the bottom of the control panel where it says “PRESS HERE”. The control panel will pivot up.

2.Pull up on the bottom of the control panel housing (under “PRESS HERE”) until it locks in place.

To put the control panel back in the vertical position:

1.Pull up on the bottom of the control panel housing (under “PRESS HERE”) to unlock it.

2.Push in where it says “PRESS HERE” until it locks into the vertical position.

Press here

Pull up here

CAUTION

When changing the control panel position, push in only on the spot marked “PRESS HERE”. If you push in on the right or left side you may damage the pivot mechanism.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents USE and Care Manual Epicure Range You Call for Model Identification Important Safety InstructionsAbout Safety Instructions For warranty and service information, seeImportant Safety Instructions Important Safety Instructions Oven Racks Each oven Rack Type Quantity Getting to Know Your RangeParts of the Oven Control Panel LayoutLight Key KeysBurner Locations Special Cooktop FeaturesAbout the Cooktop Crown Burner Assembly Setting Up Your RangeCooktop Assembly Stack Burner AssemblyIcons on Right Burner Knobs Installing the Burner KnobsGrates Icons on Left Burner KnobControl Panel Position Setting the TimeSetting the Temperature Scale 24/12 Hour Clock Military TimeTo light a burner Operating the CooktopSelecting the Cookware Lighting a BurnerCooktop Tips Using the GriddleOperating the Oven Turning Off Your Oven Changing the TemperatureChanging the Oven Cooking Mode Starting Your OvenTo disable or enable the 12 hour timer feature Preset Jump-in Temperature SettingsLock-Out Feature Hour Timer FeatureBaking Tips For Multiple Rack Baking Understanding the Various Oven ModesYour range offers three convection cooking modes For Pure Convection and Convection Bake ModesTo Use the Timers on Your Range TimersHold Mode Delay Timed Cooking FeaturesDelay Timed Cooking Set-up To cancel meat probe operation while the oven is cooking Using the Meat ProbeTo change the meat probe temperature during cooking To change the cooking mode during meat probe cookingDehydrating Tips Dehydrating/DefrostingCreating a Candied Effect Solving Discoloration ProblemsDefrosting Tips ProofingHigh Altitude Cooking Food PlacementCooking Tips Best Use of Bake WareAfter the Self-Clean Cycle is Complete Cleaning and MaintenanceYour Oven’s Self-Clean Feature How to Use the Self-Cleaning FeatureCleaning the Cooktop Self-Cleaning TipsSetting the Oven to Self-Clean at a Later Time General CleaningCleaning the Burner Components and Igniters Cooktop DisassemblyCleaning the Grates, Spill Trays and WOK Ring Glass Interior and Exterior Control PanelStainless Steel Surfaces Brass, Chrome, & Copper SurfacesOptional Roast/Broil Pan with V Shaped Rack Door Gasket SealOven Racks Meat ProbeTo replace the light bulbs, follow these steps Replacing the Light BulbsDescription Dacor part number Replacement Parts and AccessoriesProblem Solution Guide Oven Before You Call for ServiceYour Range section Problem Solution Guide CooktopWhat Is Not Covered Warranty and ServiceProduct Maintenance What Is CoveredBusiness Reply Mail Warranty Information
Top Page Image Contents