Installation Instructions, Location | Cannon 10251G, 10269G Mk2

INSTALLATION INSTRUCTIONS

Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment conditions are compatible. The adjustment condi- tions for this appliance are stated on the data badge which is fitted below the oven door on the plinth panel.

This appliance is not designed to be connected to a combustion products evacuation device. It must be installed and connected in accordance with current installation regulations. Particular attention should be given to the relevant require- ments regarding ventilation.

MODEL NUMBERS 10250G, 10255G, 10258G, 10260G, 10265G AND 10268G Mk2 Category I2H (GB, IE)

These models are set to burn NATURAL GAS (G20) at 20 mbar ONLY and cannot be used on any other gas.

MODEL NUMBERS 10251G, 10256G, 10266G AND 10269G Mk2 Category I3+ (GB, IE)

These models are set to burn PROPANE GAS (G31) at 37 mbar and BUTANE gas (G30) at 28 - 30 mbar and can not be used on any other gas.

GAS SAFETY (INSTALLATION & USE) REGULATIONS

It is the law that all gas appliances are installed by competent persons in

accordance with the current edition of the above regulations. It is in your interest and that of safety to ensure compliance with the law.

In the UK, CORGI registered installers work to safe standards of practice. The cooker must also be installed in accordance with BS 6172: 1990.

Failure to install the cooker correctly could invalidate the warranty liability claims and could lead to prosecution.

LOCATION

The cooker may be located in a kitchen, kitchen/diner or a bed-sitting room, but not in a room containing a bath or shower. The cooker must not be installed in a bed-sitting room of less than 20m3.

LPG models must not be installed in a room or internal space below ground level, e.g. in a basement.

PROVISION FOR VENTILATION

The room containing the cooker should have an air supply in accordance with BS 5440:Part 2: 1989.

The room must have an opening window or equivalent; some rooms may also require a permanent vent. If the room has a volume between 5 and 10m3, it will require an air vent of 50 cm2 effective area unless it has a door which opens directly to outside. If the room has a volume of less than 5m3, it will require an air vent of 100 cm2 effective area. If there are other fuel burning appliances in the same room, BS 5440: Part 2: 1989 should be consulted to determine air vent requirements.

10251G, 10268G Mk2, 10256G, 10266G, 10255G specifications

The Cannon 10260G, 10255G, 10265G, 10258G, and 10266G models represent a formidable lineup of advanced imaging technologies tailored for both professional and consumer-grade applications. Each model boasts a distinctive set of features and characteristics, making them versatile tools for photographers and videographers alike.

The Cannon 10260G stands out with its high-resolution imaging capabilities, supporting resolutions of up to 24.1 megapixels. It incorporates Canon's Dual Pixel CMOS autofocus technology, which offers fast and accurate focusing, essential for capturing moving subjects. Additionally, the integrated DIGIC 8 image processor enhances performance by ensuring quicker processing speeds and improved noise reduction during low-light conditions.

In the 10255G model, users will find an impressive burst shooting rate of up to 10 frames per second, ideal for sports or wildlife photography. This model also features a 3-inch vari-angle touchscreen, making it easier to frame shots from various angles and ensuring that every moment is easily captured, whether in portrait or landscape orientation.

Moving on to the Cannon 10265G, this model integrates advanced video recording features, including 4K video capability that allows creators to tap into the growing demand for high-quality video content. Additionally, it offers specialized picture profiles, such as LOG and HDR, catering to filmmakers who require extensive post-production options. The model's robust stabilization technology is another highlight, ensuring smooth footage even in dynamic shooting environments.

The Cannon 10258G emphasizes durability and weather resistance, making it an ideal choice for outdoor enthusiasts. Its rugged design can withstand various environmental conditions, while its high-capacity battery ensures prolonged shooting sessions without the need for frequent recharges. This model also incorporates Wi-Fi and Bluetooth connectivity, making it easy to transfer images and control the camera remotely.

Lastly, the Cannon 10266G combines all these advanced features with an enhanced user interface, aimed at providing a more intuitive shooting experience. Customizable controls allow users to set their preferred configurations easily, while a comprehensive suite of in-camera editing tools enables quick adjustments without the need for external software.

In summary, the Cannon 10260G, 10255G, 10265G, 10258G, and 10266G models offer exceptional performance, tailored specifications, and innovative technologies that cater to a wide array of photography and videography needs. Whether capturing stills or shooting videos, each model provides a unique blend of features that address the diverse demands of modern content creators.