Cannon 10258G, 10269G Mk2 Introduction, FITTING/REPLACING the Battery, Disposal of Your Product

Page 3

INTRODUCTION

To help you make the best use of your cooker, PLEASE READ THIS BOOKLET CAREFULLY.

Your new cooker is guaranteed and will give lasting service. The guarantee is only applicable if the cooker has been installed in accordance with the Installation Instructions.

The cooker is designed specifically for domestic use and responsibility will not be accepted for use in any other installation.

When first using the cooker ensure that the room is well ventilated (e.g. open a window or use an extractor fan) and that persons who may be sensitive to the odour avoid any fumes. It is suggested that any pets be removed from the room until the smell has ceased. This odour is due to any temporary finish and also any moisture absorbed by the insulation.

FITTING/REPLACING THE BATTERY

The battery is not covered by the guarantee. Use an alkaline AA battery.The battery holder is located in the plinth panel below the oven door. Open the oven door fully. Unscrew the knurled fixing screw anti - clockwise and remove. Withdraw the battery holder just enough to get access to the battery. Fit the new battery with the end marked “+” on the same side of the battery holder as the red lead. Replace the battery holder by placing it into the hole in the plinth and sliding to the left. Refit the screw.

DISPOSAL OF YOUR PRODUCT

To minimise the risk of injury to children please dispose of your product carefully and safely. Remove all doors and lids (where fitted). Remove the mains cable (where fit- ted) by cutting off flush with the appliance and always ensure that no plug is left in a condition where it could be connected to the electricity supply.

To help the environment, Local Authority instructions should be followed for the dis- posal of your product.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Cooker Instruction Book Contents FITTING/REPLACING the Battery IntroductionDisposal of Your Product Always For Your SafetyFor Your Safety To USE the Hotplate HotplateHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingRelighting the Burner GrillGrill PAN Handle To USE the GrillGrill To USE the Oven Oven‘COOK CHILL’ Dishes Cold Start CookingRoasting of Large Poultry Storage and RE-HEATING of FoodMeat and Poultry Oven Cooking ChartYeast Mixtures Using the ‘E’ Setting for Slow Cooking ‘E’ SettingMinute Minder Oven Heat Clean Linings Care and CleaningVitreous Enamel Cooker Finish Cleaning MethodSomething Wrong With Your Cooker Problem CheckProvision for Ventilation Installation InstructionsGAS Safety Installation & USE Regulations LocationGeneral Technical Data DimensionsCooker Hoods Space for FixingStability Bracket Connecting to GAS SupplyUnpacking the Cooker LevellingInstallation and Operational Checks Key Contacts

10251G, 10268G Mk2, 10256G, 10266G, 10255G specifications

The Cannon 10260G, 10255G, 10265G, 10258G, and 10266G models represent a formidable lineup of advanced imaging technologies tailored for both professional and consumer-grade applications. Each model boasts a distinctive set of features and characteristics, making them versatile tools for photographers and videographers alike.

The Cannon 10260G stands out with its high-resolution imaging capabilities, supporting resolutions of up to 24.1 megapixels. It incorporates Canon's Dual Pixel CMOS autofocus technology, which offers fast and accurate focusing, essential for capturing moving subjects. Additionally, the integrated DIGIC 8 image processor enhances performance by ensuring quicker processing speeds and improved noise reduction during low-light conditions.

In the 10255G model, users will find an impressive burst shooting rate of up to 10 frames per second, ideal for sports or wildlife photography. This model also features a 3-inch vari-angle touchscreen, making it easier to frame shots from various angles and ensuring that every moment is easily captured, whether in portrait or landscape orientation.

Moving on to the Cannon 10265G, this model integrates advanced video recording features, including 4K video capability that allows creators to tap into the growing demand for high-quality video content. Additionally, it offers specialized picture profiles, such as LOG and HDR, catering to filmmakers who require extensive post-production options. The model's robust stabilization technology is another highlight, ensuring smooth footage even in dynamic shooting environments.

The Cannon 10258G emphasizes durability and weather resistance, making it an ideal choice for outdoor enthusiasts. Its rugged design can withstand various environmental conditions, while its high-capacity battery ensures prolonged shooting sessions without the need for frequent recharges. This model also incorporates Wi-Fi and Bluetooth connectivity, making it easy to transfer images and control the camera remotely.

Lastly, the Cannon 10266G combines all these advanced features with an enhanced user interface, aimed at providing a more intuitive shooting experience. Customizable controls allow users to set their preferred configurations easily, while a comprehensive suite of in-camera editing tools enables quick adjustments without the need for external software.

In summary, the Cannon 10260G, 10255G, 10265G, 10258G, and 10266G models offer exceptional performance, tailored specifications, and innovative technologies that cater to a wide array of photography and videography needs. Whether capturing stills or shooting videos, each model provides a unique blend of features that address the diverse demands of modern content creators.
Top Page Image Contents