Installation
Important
This cooker must be installed by qualified personnel.
The manufacturer will not accept liability, should the above instructions or any of the other safety instructions incorporated in this book be ignored.
Regulations
This appliance shall be installed in accordance with the manufacturer’s installation instructions, local gas fitting regulations, municipal building codes, AS5601 (AG601) and any other relevant statutory regulations.
Data label
The data label is located centrally on the front frame of the cooker below the oven. This appliance is suitable for Natural or Universal LPG. Ensure that the gas supply matches the data label.
Ventilation
Ventilation must be in accordance with AS5601 (AG601) Installation Code. In general, the appliance should have adequate ventilation for complete combustion of gas, proper flueing and to maintain temperature of immediate surroundings within safe limits.
Connection to the gas supply
Gas connection must be carried out in conformity with the regulations in force. The appliance leaves the factory tested and regulated for the type of gas indicated on the plate which is situated in the lower position near the gas connection tube. Ascertain that the type of gas with which the appliance will be supplied is the same as that indicated on the plate.
If different carry out all the operations according to the indications cited in the paragraph “adaption to different types of gas”.
For a maximum output and minimum consumption ascertain that the pressure of the gas used has the values indicated in the table of “burner characteristics”.
The joint is mounted on the intake area of the pipe, fitted with a filleted nut GJ 1/2, between the sealing components. Screw the parts without forcing, turn the joint in the direction required and then tighten everything.
23