Blodgett RE Series manual Delivery and Location, Delivery and Inspection, Oven Location

Page 8

Installation

Delivery and Location

DELIVERY AND INSPECTION

All Blodgett ovens are shipped in containers to prevent damage. Upon delivery of your new oven:

DInspect the shipping container for external dam- age. Any evidence of damage should be noted on the delivery receipt which must be signed by the driver.

DUncrate the oven and check for internal dam- age. Carriers will accept claims for concealed damage if notified within fifteen days of delivery and the shipping container is retained for in- spection.

The Blodgett Oven Company cannot assume responsibility for loss or damage suffered in transit. The carrier assumed full responsibility for delivery in good order when the shipment was accepted. We are, however, prepared to assist you if filing a claim is necessary.

OVEN LOCATION

The well planned and proper placement of your oven will result in long term operator convenience and satisfactory performance.

The following clearances must be maintained be- tween the oven and any combustible or non-com- bustible construction.

DOven body right side --- 6” (15 cm) D Oven body left side --- 6” (15 cm) D Oven body back --- 6” (15 cm)

D Oven body bottom --- 4.5” (11.4 cm)

The following clearances must be available for ser- vicing.

DOven body sides --- 12” (30 cm) D Oven body back --- 12” (30 cm)

NOTE: On gas models, routine servicing can usu- ally be accomplished within the limited movement provided by the gas hose re- straint. If the oven needs to be moved fur- ther from the wall, the gas must first be turned off and disconnected from the oven before removing the restraint. Reconnect the restraint after the oven has been re- turned to its normal position.

It is essential that an adequate air supply to the oven be maintained to provide a sufficient flow of combustion and ventilation air.

DPlace the oven in an area that is free of drafts.

DKeep the oven area free and clear of all combus- tibles such as paper, cardboard, and flammable liquids and solvents.

DDo not place the oven on a curb base or seal to a wall. This will restrict the flow of air and prevent proper ventilation. Tripping of the blower mo- tor’s thermal overload device is caused by an excessive ambient temperature on the right side of the oven. This condition must be cor- rected to prevent permanent damage to the oven.

DThe location must provide adequate clearance for the air opening into the combustion cham- ber.

Before making any utility connections to this oven, check the rating plate to be sure the oven specifi- cations are compatible with the gas and electrical services supplied for the oven.

1.Remove the combustion compartment cover. The rating plate is attached to the frame on the left side of the combustion compartment.

4

Page 7 Page 9
Image 8
Page 7 Page 9
Contents ZEPHAIRE-G Avertissement Reputation YOU can Count on Page Table of Contents/Table des Matières Oven Description and Specifications GAS SpecificationsGAS Specifications -- Zephaire G-L for Australia Natural Gas Propane Gas US Units SI UnitsOven Components Oven Location Delivery and LocationDelivery and Inspection Oven Assembly NSF BoltsCaster Assembly LEG AttachmentCasters for Single and Double Stacked Ovens Low Profile Casters for Double Stacked OvensDouble Section Assembly Oven LevelingCanadian installations Australia and general export installationsInstalling the canopy hood draft diverter VentilationInstalling the draft hood Direct Flue ArrangementUtility Connections --- Standards and Codes Gas Connection GAS PipingPressure Regulation and Testing Inlet Pressure Natural PropaneKPa Manifold Pressure Natural Propane KPaGAS Hose Restraint Electrical Specifications Electrical ConnectionAdjustments Associated with Initial Installation Initial StartupSafety Information Safety TipsWhat to do in the event of a power failure General safety tipsOperation Single Speed BlowerControl Description Single Speed Blower with Cavity Lights Dual Speed Blower Dual Speed Blower with Cavity Lights General Guidelines for Operating Personnel Operating TipsSuggested Times and Temperatures Cleaning and Preventative Maintenance Cleaning the OvenPreventative Maintenance Annual MaintenanceTroubleshooting Guide Possible Causes Suggested RemedyPage Specifications Pour GAZ Specifications Pour GAZ -- Zephaire G-L pour AustraliaDescription et Spécifications du Four Gaz Naturel Gaz Propane Unités US Unités SIÉléments du Four Implantation DU Four Livraison et ImplantationLivraison ET Inspection Montage du Four Boulons NSFAssemblage DES Pieds Montage DES RoulettesRoulettes pour four simple ou pour four super- posés Roulettes de bas profile pour deux fours super- posésMise À Niveau DU Four Montage DE LA Section DoubleAvertissement Hotte D’ÉVACUATION Type Voûte Installation aux États-- Unis et au CanadaInstallation du déviateur de tirage Installation de la hotte de tirage EN Prise DirecteBranchements de Service --- Normes et Codes Longeur Dimensions nominales De conduit Pieds Branchement de GazConduit DE GAZ ExempleKPa Pression au collecteur Gaz Naturel Gaz Propane Réglage ET Test DE PressionPression à l’entrée Gaz Naturel Gaz Propane Retenue DU Tuyau DE GAZ Et Canada Raccordement ÉlectriqueSpécifications Électriques Réglages À Faire Lors DE L’INSTALLA- Tion Initiale Mise en Marche InitialeInformations de Sécurité Conseils DE SécuritéQue faire en cas de panne de secteur Conseils généraux de sécuritéUtilisation Description DES CommandesSoufflerie Une Vitesse Soufflerie Une Vitesse avec Lumières de Cavité Lumières DE Cavité MARCHE/ARRÊTSoufflerie Deux Vitesses Soufflerie Deux Vitesses avec Lumières de Cavité Consignes Générales à l’Intention des Utilasateurs ConseilsDurées et Températures Suggérées Entretien Préventif Nettoyage et Entretien PréventifNettoyage DES Fours Guide de Détection des Pannes Causes Probables SuggestionInsert Wiring Diagram Here Placer Schéma DE Câblage ICI

RE Series specifications

The Blodgett RE Series is a prominent line of commercial ovens designed to meet the rigorous demands of the foodservice industry. Renowned for its exceptional performance, durability, and efficiency, the RE Series combines cutting-edge technology with user-friendly features, making it a preferred choice for chefs and operators alike.

One of the standout features of the Blodgett RE Series is its advanced convection cooking technology. This technology ensures even cooking by utilizing a powerful fan and exhaust system, which circulates hot air throughout the oven cavity. This not only enhances cooking efficiency but also reduces cook times while maintaining consistent results. The ovens in this series are capable of achieving high temperatures quickly, making them ideal for a variety of cooking applications, from baking to roasting.

The RE Series is constructed with high-quality stainless steel, providing both durability and a sleek appearance that fits seamlessly into any commercial kitchen environment. Its robust build ensures longevity, standing up to the rigors of daily use in busy establishments. Additionally, the ovens are designed with easy-to-clean surfaces that facilitate sanitation and adherence to health regulations.

Another significant characteristic of the Blodgett RE Series is its intuitive control system. Featuring a user-friendly digital interface, operators can easily set cooking times, temperatures, and modes. This level of control allows for precise cooking, ensuring that dishes are prepared to perfection every time. Programmable recipes can also be stored, enabling consistency across multiple batches and minimizing the risk of human error.

Efficiency is a key focus of the RE Series, with models equipped to reduce energy consumption while maintaining high performance. The ovens are designed with insulation that minimizes heat loss, allowing for quicker preheating times and reduced energy usage over time. This not only benefits the environment but also helps reduce operating costs for foodservice operators.

Furthermore, the Blodgett RE Series offers versatility with various configuration options, including different sizes and rack capacities. This adaptability allows kitchen staff to use the ovens for a wide range of menu items, from pizzas to pastries, making it a valuable addition to any establishment, whether a small café or a large restaurant.

In summary, the Blodgett RE Series combines advanced cooking technology, durability, and user-friendly features to create an exceptional line of commercial ovens. With its focus on performance and efficiency, it is a reliable choice for foodservice professionals seeking to enhance their kitchen operations.
Top Page Image Contents