16.INSTALL THE BLOWER (INTERIOR OR EXTERIOR BLOWER)
Refer to instructions included with blower.
Once the blower is installed, plug the blower cord (A) into the female receptacle and the power supply cord (B) onto the male connector inside the hood.
!WARNING
Do not plug the two cords into each other.
AB
HE0078
17.REINSTALL THE PAN
CAUTION
Remove protective plastic film covering pan sides and tape over halogen lamps.
Using a Phillips no. 2 or Robertson no. 2 screwdriver and the retaining screws, reinstall the pan (previously removed in step 6) inside the hood (shaded part on illustration beside).
RETAINING SCREWS LOCATION |
HD0224 |
18.REINSTALL GREASE DRIP RAIL AND BAFFLE FILTERS
Reinstall grease drip rail(s) (1). The illustration beside shows how to reinsert the grease drip rail(s) into the range hood.
1 |
HD0225 |
CAUTION
Remove protective plastic film covering Evolutionary™ hybrid baffle filters before installing them.
Reinstall Evolutionary™ hybrid baffle filters on the hood.
It is recommended to install side filters first and finish with center one.
1.Insert one end of Evolutionary™ hybrid baffle filter into the front channel of the hood.
2.Raise the other end toward the inside of hood and insert in the grease drip rail of the hood.
Replacement filters are available from your dealer. See label inside hood for size and part number.
1 | 2 |
HD0226 |
|
| - 11 - |