Best IP29M Series installation instructions Operation CONT’D, Grease filter reset

Page 14

21.OPERATION (CONT’D)

Grease filter reset

•Once the grease filter cleaning is done, press on the grease filter reset push-button (item 4 on control illustration) to reset the filter maintenance timer. This will also shut off the grease filter maintenance icon (item 5 on control illustration).

Grease filter maintenance indicator

•After 30 hours of operation, the grease filter maintenance icon (item 5 on control illustration) appears. This means filters need to be cleaned.

•Once the grease filter cleaning is done, press on grease filter reset push-button to reset the filter maintenance timer.

Interface backlighting

•Off mode (Blower off, Particulates sensor and Air refresh modes disabled): Backlighting is off.

•Halogen lighting activated: does not affect backlighting.

•Blower turns on: Backlighting at maximum intensity.

•Particulates sensor and Air refresh mode activated: Backlighting at maximum intensity.

•Particulates sensor at sensitivity settings and Air refresh in selection mode: Backlighting at minimum intensity.

HEAT SENTRY

This hood is equipped with a HEAT SENTRY thermostat. This thermostat is a device that will start or speed up the blower if it senses excessive heat above the cooking surface.

•If blower is OFF—it turns the blower to speed 3 (blower speed icon shows H).

•If blower is ON—it turns the blower up to speed 3 (blower speed icon shows H).

NOTE:

When Heat Sentry is activated, Air refresh mode and Particulate sensor are inactivated. Also, communication

 

coming from the INSTEON™ Module is disabled.

•When the temperature level drops to normal, the blower will return to its original setting (blower speed icon will show the original blower speed).

•To turn off the blower when Heat Sentry is activated, press and hold the blower push-button (item 2 on illustration) for more than 1 second.

INSTEON™ Network compatibility

Your IP29M Series range hood can be linked to INSTEON network, if installed in your house. For more details, refer to INSTEON devices instruction sheet.

- 14 -

Page 13 Page 15
Image 14
Page 13 Page 15
Contents IP29M Series To Reduce the Risk of a Range TOP Grease Fire Never Pick UP a Flaming PAN-You may be burnedIP29M Series Range Hood System Interior Blowers BLOWER/ROUGH-IN KITIP29M Series Range Hood System IN-LINE and Exterior Blowers Select Blower Option and Installation Type Model P6 Single Interior Blower Typical DuctworkMeasure Installation Prepare the InstallationRemove the PAN Prepare the Blower HousingRemove the Filters and the Grease Drip Rail Build the Framework Install Transition to ROUGH-IN Plate Interior Blower only Install Blower HousingSecure Blower Housing to Brackets Install the ROUGH-IN Plate in the Blower HousingConnect the Wiring Install the HoodReinstall the PAN Reinstall Grease Drip Rail and Baffle FiltersLight Bulbs Replacement Operation Cooktop Lighting HalogenGrease filter reset Operation CONT’DService Parts IP29M SeriesWarranty ONE-YEAR Limited Warranty
Top Page Image Contents