Zephyr ZML-E42AG/AS Options, Installation - Ducting, Warning Fire Hazard, Soffit or crawl space

Page 9
WARNING FIRE HAZARD

WARNING FIRE HAZARD

NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling, attics or garages. All exhaust must be ducted to the outside, unless using the recirculating option.

Use single wall rigid Metal ductwork only.

Fasten all connections with sheet metal screws and tape all joints w/ certified Silver Tape or Duct Tape.

Options

Some Ducting Options

Roof Pitch w/

Flashing & Cap

(blower

housing)

(blower

housing)

Soffit or crawl space

side wall cap

w/ gravity damper

Installation – Ducting

(blower

housing)

ductless recirculating

7

Image 9
Contents Milano Island Use, Care, and Installation GuidePage INSTALLATION Table of ContentsMAINTENANCE Hood and Filter CleaningREAD AND SAVE THESE INSTRUCTIONS Important Safety NoticeELECTRICAL REQUIREMENTS OPERATIONList of Materials MODELS ZML-M90AS, ZML-M90AG, ZML-E42AS, ZML-E42AGPARTS SUPPLIED Installation - Ducting Calculation Sheet DUCTING Installation - Mounting Height & ClearanceInstallation - Ducting OptionsWARNING FIRE HAZARD Soffit or crawl spaceSpecifications InstallationHood blower housing & ceiling bracketInstallation - Mounting the Hood FIG. B FIG. CFIG. A FIG. D FIG. Ecut-down Charcoal Filter Replacements Ductless RecirculationRECIRCULATING KIT REQUIRED IF NO DUCTING IS USED FIG. FTouch Controls Features & ControlsAdjust 6 Speed Levels 15 Min Delay Off 1. Blower On/Off Lights On/Dim/OffFilter ReminderCharcoal Filter Change Reminder charcoal filter, if installed Setting the Filter Change ReminderFeatures & Controls - Metal Mesh Filter Clean ReminderMetal Filter Clean Reminder metal mesh filter Metal Filter Clean IndicatorSURFACE MAINTENANCE Maintenance - Hood and Filter CleaningMetal Filter Dimensions Metal FiltersCAUTION Light bulb becomes extremely hot when turned on Maintenance - LightsREPLACING LIGHT BULBS of theTROUBLESHOOTING PROCEDURES FOR MILANO ISLAND TroubleshootingIssue CauseReplacement Parts List of Parts and AccessoriesOptional Accessories DESCRIPTIONJUN08.0101 Limited Warranty