Sunfire Official Manual for the TGR-3 Home Theater System

with its own surround decoder. You can select this as an input from the front panel or remote control. The eight channels of analog audio will then pass into the TGR-401.

Note: if you use HD-DVD or Blu- ray DVD players that have 7.1 analog audio outputs, use this 8- channel input. It is fully processed in DSP with bass management, speaker delays and tone controls. Only the left/right jacks are avail- able in Zone 2.

10. Digital Connections

There are four S/PDIF digital coaxial inputs, with one coaxial output, and four digital optical inputs with one optical output.

Use these with source equipment that has digital audio connections.

11. TP1 and TP2

12. RS-232 Port

This communications port allows future updates of the software from Sunfi re to be made to your TGR-401. It may also be used for control by 3rd party integration systems.

13. VIA!migo Port

This port allows connection of a proprietary VIA!migo iPod dock- ing station system available from Sunfi re.

Do not connect this port to Ethernet or other computer networks.

14. Infrared (IR)

These inputs and outputs are used in custom installations to control the Main Zone and Zone 2 from a remote location.

CHAPTER 1

Use the screw terminal input to connect standard IR distribution equipment (such as an IR sensor) for Main Zone or Zone 2 opera- tion. The screw terminals accepts bare wire connections (2 or 3-wire input and 2-wire output).

The remote sensors can be in a different room, or your main room.

15. Trigger Outputs

These allow the TGR-401 to con- trol the turn-on of other trigger-en- abled equipment in your system.

16. IEC Line Cord Socket

The TGR-401 comes with a detachable linecord that connects here.

Plug the line cord into an AC wall socket or power strip that is cor- rectly confi gured with the voltage specifi ed for your model.

Optional Olé-2SF Film Interac- tive touchpads are available for external control of Zone 2 or the Main Zone.

These wall-mounted touchpads connect to TP1 or TP2 using stan- dard CAT-5 cable.

Please contact your Sunfi re dealer for more information. Use only touchpads that are recom- mended by Sunfi re.

Do not connect these ports to Ethernet or other com- puter networks.

The Infrared (IR) Input on the

TGR-401 utilizes Tip as +12V, Ring as IR, and Sleeve as Ground. In order to correctly utilize standard two or three wire IR equipment, the wiring needs to be connected as shown.

Zone 2 (2)

Standard IR Sensor

GND +12VDC IR

17. AC Line Fuse

Always unplug the linecord from the AC Mains before checking or changing the fuse. If this fuse blows, you must replace it with a fuse of exactly the same size and current rating.

18. Power Switch

If this is switched off, the TGR-401 will be off, and cannot be turned on even with the front panel power switch, the remote control, or optional Olé-2SF touchpads.

In normal operation, leave this switch on. Turn it off if you will not be using the TGR-401 for extend- ed periods.

User's Manual

13