Sunfire TGR401, TGR-401-230 Front Panel Input Connections, Component Video with Digital Audio

CHAPTER 2

Front Panel Input Connections

MODE	Component video inputs
button	or L/R audio and com-
and	posite video, depending	Optical	S-Video
LED	on the MODE button	Input	Input	Mic Input

Component Video with Digital Audio

Video Connections

From: Game Console component video outputs

To: TGR-401 Front component video inputs

Audio Connections

From: Game Console digital optical output

To: TGR-401 Front digital optical input

Left/Right Analog Audio and Composite Video

The front panel input section is the ideal place to make quick connec- tions to equipment such as gaming consoles or video cameras. There is also a connection for the microphone used in the auto-setup and auto-EQ procedures.

Using the MODE switch, the three front panel RCA input jacks can quickly be con gured as component video inputs, or left and right analog audio and composite video inputs.

For component video connections, press the MODE switch until the LED next to it turns on. Then connect the component video outputs from your gaming console or other equipment, to the TGR-401 front RCA inputs. To get audio in, use the digital optical input.

If your video camera has left/right analog audio connections and com- posite video, you can connect it as shown below.

Press the MODE switch until the LED next to it turns off.

The mode can also be changed us- ing the remote control FTRMD button in TG401 and Zone2.

20

Video Connections

From: Camera composite video output

To: TGR-401 Front composite video input

Audio Connections

From: Camera left and right analog audio outputs

To: TGR-401 Front left and right analog audio inputs

User's Manual