Sunfire TGR-401-230, TGR401 manual Triggers, Trigger OSD Menu

Triggers

Trigger Outputs

Three trigger outputs supply +12 VDC whenever they are turned on. These can be used to turn on external Sun re power ampli ers equipped with a 12 V trigger input, or to deploy video screens for example.

Use all standard safety pre- cautions and make sure all the equipment is disconnected be- fore making any connections.

CHAPTER 5

Trigger OSD Menu

The TRIGGER OUTPUT menu al- lows you to set up each input to turn on a trigger voltage when that input is turned on in the Main Zone, Zone 2, both zones, or off (no trigger). The delay time can also be set from 0 to 5 seconds. Each of the triggers can be setup separately.

MAIN MENU

TRIMS

TONE

MODES

PRESETS

SETUP

SETUP	CHOICES
INPUTS
SPEAKERS
VIDEO
MAIN ZONE
ZONE 2
CONTROL
DIGITAL OUT		DN MIX/THRU
DIMMER	LOW/MEDIUM/HIGH

CONTROL			CHOICES
RS232 BROADCAST		Y	Y, N
TRIGGERS
FRONT IR SENSOR		NORM	NORMAL,NO RPT,OFF
SIRIUS RESET
SETTINGS SAVE
SOFTWARE VER.		X,Y,Z	FIRMWARE REVISION
EX VERSION		X,Y,Z	FLASH REVISION
BT VERSION		X,Y,Z	BOOTLOAD REVISION
TRIGGERS
TRIGGER OUTPUT 1
TRIGGER OUTPUT 2
TRIGGER OUTPUT 3
	TRIGGER OUTPUT		1	2	3	CHOICES
	DELAY TIME		1S	1S	1S	0 TO 5
						1 SEC STEPS
	1 HD/BD		MAIN	ZONE 2	M/Z2	OFF, MAIN,
	2 SAT		MAIN	ZONE 2	M/Z2	ZONE 2, M/Z2
	3 DVR		MAIN	ZONE 2	M/Z2
	4 MP3		MAIN	ZONE 2	M/Z2
	5 DVD		MAIN	ZONE 2	M/Z2
	6 CABLE		MAIN	ZONE 2	M/Z2
	7 VCR		MAIN	ZONE 2	M/Z2
	8 CD		MAIN	ZONE 2	M/Z2
	9 HD/BD-7.1		MAIN	ZONE 2	M/Z2
	10 SIRIUS		MAIN	ZONE 2	M/Z2
	11 TUNER		MAIN	ZONE 2	M/Z2
	12 FRONT		MAIN	ZONE 2	M/Z2

49

User's Manual