Windster WS-38 manual For mounting under cabinet, Remove and Reinstall Baffle filters

Page 10

H. Remove and Reinstall Baffle filters

②

①

1. Wear safety workman gloves and

2. Push Baffle filter down ward ①,

hold the handles of Baffle filter.

then pull a little back ②.

③

3. Lift up the Baffle filter ③.

4. Pick up the inner oil collector.

NOTE : Reinstalling Baffle filters. Reverse the steps as removing Baffle filters.

For mounting under cabinet

1.After above step H, then continue the following steps.

2.Remove 2 screws on the spacer(s).

3.Remove spacer(s).

4.Key hole to mount to under cabinet.

Key hole

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Operation Manual Table of Contents Important Safety Insturctions Observe the FollowingCall the Fire Department Safety Notes Accessory Package Tools and Materials RequiredPreparing The Range Hood Preparing The Installation Location Providing Electrical Power Remove and Reinstall Baffle filters For mounting under cabinetMaintenance Instruction DuctingVertical Rectangular Ducting Rear Rectangular Ducting Rear Rectangular Ducting Mounting Range Hood To Cabinet Mounting Range Hood Without Cabinet Making The Electrical Connection Use and CareNever Press ANY of TWO Buttons in a Time Use for Light Care Instruction Graphic wordings on control panelTroubleshootings Replace The LED LightParts Layout Diagram Parts List Circuit Diagram Size Limited Warranty Defective Products Windstertm
Top Page Image Contents