Windster WS-38 manual Mounting Range Hood Without Cabinet

Page 16

N. Mounting Range Hood Without Cabinet

1.Using metal brackets and screws (included), center hood onto board and install screw.

2.Remove the hood from the board and nail the wood board onto the wall. (Be sure the nail is in the center of the stud)

3.Place the range hood on the board and tighten the screw.

Bracket

Screw

4. Completely finished

14

Image 16

Contents Operation Manual Table of Contents Important Safety Insturctions Observe the FollowingCall the Fire Department Safety Notes Accessory Package Tools and Materials RequiredPreparing The Range Hood Preparing The Installation Location Providing Electrical Power Remove and Reinstall Baffle filters For mounting under cabinetMaintenance Instruction DuctingVertical Rectangular Ducting Rear Rectangular Ducting Rear Rectangular Ducting Mounting Range Hood To Cabinet Mounting Range Hood Without Cabinet Making The Electrical Connection Use and CareNever Press ANY of TWO Buttons in a Time Use for Light Care Instruction Graphic wordings on control panelTroubleshootings Replace The LED LightParts Layout Diagram Parts List Circuit Diagram Size Limited Warranty Defective Products Windstertm