Windster WS-38 manual Preparing The Range Hood

Page 7

E. Preparing The Range Hood

1.Remove the top electrical knockout, you may plan to bring power to the range hood either through the cabinet or through the wall (Fig.1)

Electrical Knockout

Fig.1

2.Insert a screwdriver into the knockout slot and bend the knockout back and forth. (Fig.2)

3.You may have to use pliers to pull the loosened knockout free.(Fig.3)

Fig.2

4.When installed, the bottom edge of your range hood should be 28" ~ 32" above the top of the cooking surface. (Fig.4)

Fig.3

28”-32”

Fig.4

5

Image 7
Contents Operation Manual Table of Contents Observe the Following Important Safety InsturctionsCall the Fire Department Safety Notes Tools and Materials Required Accessory PackagePreparing The Range Hood Preparing The Installation Location Providing Electrical Power For mounting under cabinet Remove and Reinstall Baffle filtersDucting Maintenance InstructionVertical Rectangular Ducting Rear Rectangular Ducting Rear Rectangular Ducting Mounting Range Hood To Cabinet Mounting Range Hood Without Cabinet Use and Care Making The Electrical ConnectionNever Press ANY of TWO Buttons in a Time Use for Light Graphic wordings on control panel Care InstructionReplace The LED Light TroubleshootingsParts Layout Diagram Parts List Circuit Diagram Size Limited Warranty Defective Products Windstertm