I. Maintenance Instruction
1.Maintenance shall be important than repair. Please take care of the needed maintenance in order to secure and extend the excellent functions and using life.
Note : Before repairing the range hood. Disconnect the power source.
2.After using the machine, wipes the machine by neutral detergent in order to keep it clean and maintain the appearance with brightness and sanitation.
3.When the level of dirty oil of the collector reached 4/5 of height, it has to be removed in order to avoid overflowing and pollution.
J.Ducting
This style of range must be vented via ducting to the outside of the house. Follow general rules when ducting the hood: Use correct size of ducting (6" or 7” round ), do not reduce size of ducting, make all turns gradual, no short corners. If ducting ran will be longer than 10 feet enlarge duct by at least 1" inch diameter after each 10 feet. Tape all joints in ducting and all gasketed openings on hood for a tight seal.
For round ducting from the top:
Loosen 2 screws (Ref.1), fit the gray plastic round collar / 6” over the circular opening on top (Ref.2) and fasten 2 screws (included) in order to provide a tight seal for ducting to attach to (Ref.3), if you want to use 7” ducting, take 7” converter (included) to join together with the 6” round collar(Ref.4).
1 | 2 | 3 | 4 |
Loosen
Loosen 2 screws
Fasten
Fit 6" collar | Fasten 2 screws | Fit 7” converter |
9