W OL F DRAWER MIC ROWAVE OPER ATION
BEFO RE O P ER ATING
Before operating your new drawer microwave, make certain you read and understand the operation instructions completely.
Before the drawer microwave can be used, follow these steps:
1)Plug in drawer microwave. ENJOY 
YOUR
MICRO- 
WAVE 
TOUCH 
CLEAR 
AND
TOUCH 
CLOCK will appear.
2)Touch the STOP/CLEAR pad.
:will appear.
3)Set clock.
TO SE T THE CLOC K
1)Touch TIMER/CLOCK pad and number 2.
2)Touch number pads for correct time of day and touch TIMER/CLOCK pad again.
This is a 12 hour clock. If you attempt to enter an incorrect clock time, ERROR will appear in the display. Touch the STOP/CLEAR pad and
If the electrical power supply to your drawer microwave should be interrupted, the display will intermittently show ENJOY 
YOUR 
MICRO-
WAVE 
TOUCH 
CLEAR 
AND 
TOUCH 
CLOCK
after the power is reinstated. If this occurs during cooking, the program will be erased. The time of day will also be erased. Simply touch the STOP/CLEAR pad and reset the clock for the correct time of day.
NOTE: The drawer microwave can be programmed with the drawer open except for
START/ADD MINUTE.
TI MER
1)Touch TIMER/CLOCK pad and number 1.
2)Enter time.
3)Touch TIMER/CLOCK pad again.
To cancel timer, touch STOP/CLEAR pad.
ST OP/ CLE AR
Touch the STOP/CLEAR pad to:
Erase if you make a mistake during programming.
Cancel timer.
Stop the drawer microwave temporarily during timed cooking.
Return the time of day to the display.
Cancel a program during cooking, touch twice for timed cooking.
Dimensions in parentheses are in |
|
millimeters unless otherwise specified. | 13 |