W O L F W A R M I N G D R A W E R S
P L A N N I N G I N F O R M A T I O N
The Wolf 30" (762) warming drawer is shipped without any decorative drawer front. You must order a L Series or E Series stainless steel drawer front with handle, or the integrated front (no handle) for a custom wood application.
Specifications on the following pages provide overall dimensions, rough openings and installa- tion options for Model WWD30 with L Series and E Series stainless steel and integrated drawer fronts. Note that there are significant differences to the installation requirements for the integrated drawer front.
An
The base platform must be able to support 200 lbs (91 kg). This platform must be a minimum of 1" (25) above the toe kick to allow for the 5/8"
(16) overlap of the warming drawer trim.
Model WWD30 may be installed below a Wolf
S T A I N L E S S S T E E L D R A W E R F R O N T S
Wolf recommends using a 33" (838) wide cabinet for the warming drawer with the L Series and E Series stainless steel drawer front. A minimum 30" (762) wide by 24" (610) deep cabinet is required.
I N T E G R A T E D D R A W E R F R O N T
IMPORTANT NOTE: A minimum 33" (838) wide cabinet is required for the warming drawer with integrated drawer front. A minimum 24" (610) deep cabinet is required for an overlay applica- tion and 25" (635) deep cabinet for a flush inset application.
Model WWD30 with integrated drawer front can accommodate installations with a 30" (762) or 36" (914) cooktop. It may also be installed in combination with a 30" (762) L Series or E Series single or double oven or a 36" (914) L Series single oven. Dimensions will vary according to the specific installation.
Keep in mind that the width of the custom panel for the warming drawer with integrated drawer front will vary according to the specific installa- tion. The opening width will remain 291/2" (749) whether installed in combination with a 30" (762) or 36" (914) cooktop or oven.
The decorative wood drawer front panel must be a minimum of 5/8" (16) thick.
E L E C T R I C A L R E Q U I R E M E N T S
Model WWD30 requires a separate, grounded 120 V AC, 60 Hz power supply. The service should have its own 15 or 20 amp circuit breaker, and a grounded
IMPORTANT NOTE: When installed outdoors, a ground fault circuit interrupter (GFCI) is required to reduce the risk of electrical shock.
A C C E S S O R I E S
Optional accessories are available through your Wolf dealer. To obtain local dealer information, visit the Showroom Locator section of our website, wolfappliance.com.
F R O N T P A N E L O P T I O N S
Model WWD30
L Series Stainless Steel Drawer Front
Classic Finish | WWDFRONT/S |
Platinum Finish | WWDFRONT/P |
Carbon Finish | WWDFRONT/B |
E Series Stainless Steel Drawer Front
Framed – Classic
Unframed – Classic
Integrated Drawer Front
Accepts Wood Panel WWDFRONT/I
Optional drawer front panels are ordered and shipped as a sales accessory. Stainless steel drawer front panels include handles to match L Series or E Series
23